HTML sitemap for products

Products

• Allen Idle Jet Extensions
• 48 IDA Accelerator Cam
• Accelerator Arm Springs
• 55mm DCOE Side Draft Booster
• 51.5MM EPC/IDA Billet Venturi - Set of 4
• 51.5 Weber Conversion Kit
• 48MM IDF Billet Venturi - Set of 4
• 48MM EPC/IDA Billet Venturi - Set of 4
• 48 Weber IDA, Idle Jet - Each
• 48 Special Deluxe Kit
• 48 IDA Weber Gasket Rebuild Kit
• 48 IDA Squirter (Pump Jet) O-Rings
• 48 IDA O-Ring Squirter (Pump Jet)
• 40mm IDF Billet Venturi - Set of 4
• 40/44mm HPMX 44mm IDF Billet Venturi - Set of 4
• 44mm IDF & HPMX Venturi, 26, Pair
• Type 4 Flywheel Shims
• 48 Special Short Deluxe Kit
• 48 Weber IDA
• 48 IDA Dual Vibration Isolators
• 911 Alloy Wheels, 5x130
• 911 Alloy Wheels, 5x205
• Chrome Valve Stems, Set of 4
• 911 Alloy & Gasser Replacement Caps
• 911 Alloy Wheel, 5.5" Wide, 5x112
• Stainless Steel Vented Gas Caps, for Aluminum and new Stainless Steel Tanks, Each
• VW IDF 44mm Carburetor "Only" Type 1 and 2 VOLKSWAGEN Bug, Bus, Ghia
• VW 94mm WaterBoxer 2.1 Piston Set, 10.5:1 High Comp European
• VW 94mm 2100cc Water Cooled Piston & Cylinder Kit, 10.5:1 High Comp European
• Porsche 356C/912/911 Hardened Valve Keeper
• Replacement Element, Pack of 2
• Fuel Filter Kit, w/ Hose & Clamp, Fits 1/4", 5/16", and 3/8" fittings
• Fuel Filter Only with 1/4", 5/16", and 3/8" fittings
• Oil Dipstick Adapter w/ Gasket
• Porsche 356/912 Titanium Valve Retainer
• Porsche 356/912 Stock Valve Retainer (Each)
• Porsche 356/912 Valve Guide Seal
• Porsche 356C/912 Single High-REV Valve Spring (Each)
• ARP Fastener Assembly Lubricant
• Dual Circuit Master Cylinder, Super Beetle 71-79 *Made in Germany*
• Dual Circuit Master Cylinder, fits ’71-’79 Super Beetle
• Master Cylinder for Four Wheel Disc Brakes w/ Reservoir, 20.8mm Big Bore, fits ’49-’77 Bug, Ghia & Thing
• Replacement parts for EMPI Valve Cover Set
• EMPI Valve Cover Set
• Sand Seal Pulley Kits (Standard Diameter)
• D3 2" x 2" Latch & Link Harness w/ No Pads, Black
• 1200-1600cc Exhaust Port Gasket, Pack of 4
• Chrome Bolt & Washer Set
• Engine Case Adapter for Type 2 & 3
• Doghouse Engine Tin, 2 Pieces
• Chrome Dress-Up Kit
• EMPI Raider Rim 5x15 Anthracite w/ Polished Lip Wheel VW bug Type 1 & 3
• Racing Dual Valve Spring Kit
• Racing Dual Valve Springs, Set of 8
• High-Rev. Single Valve Springs, Set of 8
• High-Rev. Single Spring Kit
• Polished Aluminum T-Bars, Pair
• Single Glass Pack Exhaust System
• Poly Low-Back Seat Covers
• Poly High-Back Seat Covers
• Plastic Low-Back Bucket Seat Covers
• Porsche 911 2.7L 90mm Forged JE Piston Set, C/R: 9.5:1
• Porsche 911 2.7L 92mm Forged JE Piston Set, C/R: 10.5:1
• Bugpack Urethane Steering Coupler with Hardware, Type 1
• EMPI Competition Studs and Nuts
• EMPI Chrome Wheel Locks
• Chrome Lug Nuts (Small O.D.) - 60° Seat
• Lug Bolt Washers Only, Flat, Set of 5
• Lug Bolt Adapter Washers Only, (60° Acorn to Metric Ball Seat), Set of 4
• Chrome Nut & Stud Kit
• EMPI Chrome Lug Nuts
• EMPI Wheel Studs
• Chrome Lug Bolts - 14mm, 60°, Set of 4
• Stock 12-Volt Bushing for Starter Shaft
• Starter Bolt, Each
• Starter Adapter Bushings
• 1/2" Female Swivel x 1/2" Hose Barb, Pack of 2
• Oil System Fittings, Pack of 2
• Gas Tank Outlet Pipe Kit, Type 1, 60-74
• Billet Aluminum Pole Mount for 1-1/2" Tubing
• Single Port End Kit, Type 1, 2, & 3
• 1-5/8" J-Tubes for Merged Header, Pair
• Engine Trim Kit
• Accu-Fire Electronic Ignition Kit
• Karl Schmidt KS Rod Bearings for VW Type 4 / Porsche 914 1.7 & 1.8L, .75mm/0.3
• Vintage Style Hub Cap Puller, Pair
• Stock Length 8mm Chromoly Case Stud Kit for Dual Port Heads
• Stock Length, Fully Assembled 11.078" Long, 3/8" Chromoly Push Rods, Set of 8, 0.8mm (0.032") Wall Thickness
• Stock Length Fully Assembled High-Performance Push Rods, 1.45mm (0.057") Wall Thickness
• Chrome Tail Pipe Kit
• EMPI EPC 34 or ICT Hex Bar Linkage Kit for Type 3
• EMPI Dual 44HPMX Kit, Type 1
• EMPI Dual 40HPMX Kit
• EMPI Dual 40 IDF Carb. Kit for 1700-1800cc w/ Air Cleaners
• EMPI 44mm Dual Brosol / Solex Kit, for 2.0L Type 2's
• Camshaft Plug Seal (Rubber)
• Wilwood Front Disc Brake Kit, Drop Spindle, 4x130mm, Type 1 & Ghia 66-74
• Wilwood Front Disc Brake Kit, Bolt-On, 4 Lug VW Pattern, for Super Beetle 71-79
• EMPI Push Rods (set of 8)
• Billet Fuel Pump Block-Off w/ Hardware
• Fuel Pump Block-Off w/ Boss
• Master Cylinder Conversion Kit
• Replacement Brake Pads for Type 2 Sets
• EMPI Front Disc Brake Kits for Type 2
• Power Pulleys
• Aluminum Degree Crankshaft Pulleys
• Standard-Size Pulley Kits
• Pulley Belts
• Replacement Parts for Sand Seal Power Pulley Kits
• Sand Seal Pulley Kit
• 1-1/2 Quart VW Oil Sump for Type 4
• Weld-On Front Torsion Bar Adjuster, Ball Joint for Type-1 '66 & Later
• Weld-On Front Torsion Bar Adjuster, Link Pin for Type-1 Thru '65
• Sachs Complete Clutch Kit, 215mm Type-2 74-75, Van 83
• VW 1600 Dual Port Top End Rebuild Kit 1600 1641 1688
• VW Metal Brake Line Kit, Beetle '67-77, Ghia '68-74
• Heavy-Duty Tie Wraps With Stainless Steel Tabs
• Standard Duty Tie Wraps
• Head CC Measuring Kit
• Jack Plate
• Bench Mount Engine Stand
• Ratchet Tie Downs
• Tie Downs, 1" Camlock, 5' Long, Each
• Tow Straps
• EMPI Axle Straps
• Deluxe Valve Cover Vents, Pair
• Billet Universal Support Brackets
• Billet J-Hook Support Bracket, 1-1/2", Set of 5
• Deluxe Billet Whip Antenna Mount, 1-3/4", Each
• Billet Side Steps
• Billet Foot Pegs, Pair
• Shock Reservoir Clamp, Billet, 2.0”, Each
• Billet Off-Road Registration Sticker Bracket
• Billet Coil Clamp Only
• Billet Universal Mounts and Brackets
• Billet Grab Handle, 5/16" x 18, Each
• Adjustable Grab Handles
• Billet Foot Rest, Direct Mount
• Billet Grab Bar, For 1-1/2" Tubing
• 45-Degree Grab Handles / Foot Rest
• 90-Degree Grab Handles / Foot Rest
• Billet Clamp-On Grab Handles
• Billet Bracket, Narrow, Each
• Billet Bracket, Undrilled
• Foot Rest, Billet, Each
• Side Drilled Bracket, Billet, 2-3/4” Wide, Each
• Side-Drilled Billet Brackets, 3-1/2" Wide
• Polished Aluminum Universal Tach Mount Bracket For 1-1/2" Tubing
• Billet Aluminum Brake Line Bracket
• Billet Bracket, Extra Wide, Each
• Light Mount Bracket, Billet, Pair
• Shaped Billet Bracket
• Chrome Cap for Lamp Shield
• Standard Bulb for Light Pole
• Lamp Shields, Each
• Base Mount for Light Pole, 1/2" x 20 Female Threads
• Billet Aluminum Fold Down Pole Mount
• Stainless Steel Fuel Tank Brackets
• Replacement Mounting Brackets For Gas Caps
• Remote Filler Neck, 3 pc. Set
• Bung, Fuel Tank, 3 pc. Set
• Flip Top Fuel Filler Cap
• Fuel Shut-Off Valve, 1/4" Hose x 1/4" NPT
• Screw-on style Gas Caps
• Polished Stainless Steel Gas Tank Kits - 8" Diameter
• Polished Stainless Steel Gas Tank Kits - 10" Diameter
• Polished Aluminum Billet GPS Mount for 1-1/2" Tubing
• Aluminum Switch Boxes
• Polished Aluminum Buggy Center Consoles
• Replacement Halogen Bulbs - H1, H2, & H3
• Baja Light Bar, (Black Painted), Each
• Headlight Housing
• 7" Chrome Headlight Housings
• Off-Road Tail Light Covers, Pair
• L.E.D. Off-Road Tail Lights, Pair
• Heavy-Duty Off-Road Tail Lights
• EMPI Light Covers for Chrome Off-Road Lights
• EMPI Chrome Off-Road Lights
• Billet Rear View Buggy Mirrors
• Billet Side View Buggy Mirrors
• 3-Bar Slide, Pair
• Snap (Flat) & Eye Bolt Kit
• Crow Anti-Submarine Belt
• 2” Shoulder Harness only, Individual Twin Bolt-In Mount, Black, Each
• 2” Shoulder Harness only, Y-Type Wrap-Around Mount, Black, Each
• Crow Driver Restraint System, 3x2 System with Wrap-Around Harness
• Crow Driver Restraint System, 3x3 System with Twin Harness
• Crow Driver Restraint System, 3x3 System with V-Type Harness
• Crow Driver Restraint System, 3x3 System with Y-Type Harness
• Fiberglass Seats and Covers, 37-3/4" Widest Point
• Fiberglass Seats and Covers, 34-1/4" Widest Point
• Seat Covers, Black Square Pattern
• Plastic Low-Back Bucket Seat
• Poly Low-Back Seat
• Poly High-Back Seat
• Race-Trim UTV/Side x Side Low-Back w/ Adjustable Headrests
• Race-Trim Showroom Seat Display w/ Hardware - Painted Black
• Race-Trim Seat Material
• Race-Trim Black Vinyl / Black Fabric Child Seat
• Race-Trim Wide Low-Back Seats With Adjustable Headrest
• Race-Trim Black Vinyl Wide High-Back Seats
• Race-Trim Black Vinyl High-Back Seats
• Race-Trim Low-Mount Seat Mounts
• Race-Trim Seat Mounts
• Race-Trim Seat Sliders
• Black Leather Look Vinyl w/ Carbon Fiber Look Accents
• Low-Back Roadster-Style Seat, Black, Each
• Low-Back Roadster-Style Seat, Black w/ Polished Vent Grommets, Each
• Forged Clevis Mount, Pair
• Clevis, Limit Strap, Chrome, Pair
• Limit Straps, Pair
• Adjustable Spring Plates (Painted)
• Heavy-Duty Spring Plates (Painted)
• I.R.S. Conversion Clips, Pair, Raw
• I.R.S. Box Kit, 6 pcs., Raw
• Shock Mount Kit with 6 Shock Bushings, I.R.S., Pair, Raw (Requires Welding)
• Shock Mount Kit, Swing Axle, Pair, Zinc Plated (Bolt-On Installation)
• Chromoly Tapered Bungs
• IRS Billet Aluminum Bearing Cap for Stock Application, Each
• Axle Bearing Housing, IRS, Steel, Each (Boxed)
• IRS Axle Bearing Cap, Chrome Steel, Pair
• Torsion Tube End Plates
• Chromoly Threaded Bung
• Conversion Plate, Stock VW Torsion Housing, 4 pc. Kit, Offset to Clear Stock Housing
• IRS Clips, Custom Torsion, Pair
• Accelerator Cable Spring Seat, Type 1 46-65, Ghia 56-65, Type 2 50-63
• Cable Mount w/ Bolt, Each
• Cable Shortening Kit, Throttle Only (Fits on cable only)
• Angled Throttle Pedal, Unpolished
• EMPI Universal Throttle Pedal
• EMPI Billet Throttle Pedal w/ Ball Milled Grooves & EMPI Logo
• Aluminum Foot Pedal Only
• Stainless Steel Roller Pedal Cable Bracket
• Throttle Cable Extender, 8" Cut to Length, for Morse and EMPI Cables (10-32 Thread)
• Clamp and Shim Cable Mount
• Hook Clamp Cable Mount
• Cable Clevis (10-32 Thread)
• Cable Ball End (10-32 Thread)
• EMPI Shielded Control Cables
• Pedal Assembly Mount, Raw, Each
• Cable Extender, Adjustable, Each
• Deluxe Pedal Slide, Billet, w/ Throttle Pedal Provision, Each
• Billet Brake Line Union, Each
• Rebuild Kit for 3/4" Upright Turning Brake Assembly
• Rebuild Kit for 3/4" Angled Turning Brake Assembly
• Rebuild Kit for 3/4" Single Master Cylinder
• Rebuild Kit for 7/8" Clutch - 7/8" Brake Master Cylinder
• Rebuild Kit for 3/4" Clutch - 7/8" Brake Master Cylinder
• Large Boot Only For Master Cylinders, Each
• Large Pedal Pad Only For Single Pedals
• Small Pedal Pad Only For Dual Pedals, Each
• Square Top Only w/ Screw On Cap. Fits All EMPI Square Reservoirs.
• Race Trim Master Cylinder - High Reservoir
• Race Trim Turning Brakes
• Single Pedal Assembly w/ Dual Master Cylinders
• Dual Pedal Assembly, 3/4" Clutch - 7/8" Brake, fitting size is 1/8" NPT
• Bleeder Valve 1/8” NPT, Pair
• Brake Line Fittings, Brass, Package of 6
• 90-Degree Male 1/8" NPT to Female 10mm x 1.0 Bubble Flare, Pair
• Male 1/8" NPT to Female 10mm x 1.0 Bubble Flare, Pair
• Brake Line Plugs, M10 x 1.0, Pair
• All Weather Floor Liner 2-Piece Set for Type 1 1958-72
• Heim Ends
• EMPI Slave Brackets
• Rebuild Kit Only for 16-2549-0
• Clutch Slave Unit
• Type 1 to Type 2 Shift Shaft Coupler, Each
• Universal Shift Shaft, 59" overall length, Each
• Off-Road Shifter Mount Box, Each
• Universal Shift Box, Black, Each
• Grub Screw for Coupler, Each
• Early Shift Coupler
• Shift Rod Adjuster
• Replacement Boot Only for 16-2105-0 / 16-2106-0
• EMPI Chrome Super Shifters
• Coupling Disc, Steering Shaft, Type 2 68-79
• Coupling Disc, Steering Shaft, Type 1 50-78, Ghia 56-74, Type 3 64-73, Each
• Stock Steering Coupler, Chrome, 2 pc. Set
• Quick Steering Adapter Kit
• Quick Release Steering Coupler
• Steering Wheel Quick Disconnect
• 3-Hole Steering Flange Only, Raw, Each
• Chrome Steering Shaft Bearing, Each
• Steering Shaft, Each
• Aluminum Clamp Nuts
• Steering Shaft Mount
• Steering Shafts, Splined Both Ends
• Splined Steering Shafts
• Coupler, Clamp Style
• Coupler, 3/4” 48 Spline, 2" Long, Each
• Rack and Pinion U-Joints
• Chrome Tie Rod Set w/ Link Pin, Tie Rod End and Clevis, Each
• Rack Mounting Bracket, Each
• Tie Rod Kit
• Replacement Boot for P/N: 00-3147-0 / 16-2180-0, Each
• U-Joint for Rack & Pinion, 5/8"-36 Splines on both ends (Black)
• Broached Coupler Only for all R & P Units (36 Spline)
• Rack & Pinion Unit, 2 Mounting Holes, 11", 5/8 - 36 Spline Shaft, 1-1/2 Turns Lock to Lock, Each, (Boxed)
• Rack & Pinion Unit, 4 Mounting Holes, 14", 5/8 - 36 Spline Shaft, 1-1/2 Turns Lock to Lock, Each, (Boxed)
• Aluminum Buggy Master Cylinder Reservoir, Each
• Buggy Master Cylinder with Billet Aluminum Reservoir, Set
• 22mm Polished/Chrome Buggy Master Cylinder
• Brake Fluid Reservoir Sealing Washer Only, Each
• Polished Billet Aluminum Master Cylinder Reservoir Only w/ Cap
• 22mm Buggy Master Cylinder w/ Residual Valve and Polished Aluminum Reservoir
• 22mm Buggy Master Cylinder w/o Residual Valve.
• 22mm Buggy Master Cylinder Only w/ Residual Valve
• Plastic Reservoir Only
• Mount Tube Only for Race-Trim Micro Stub Kit, Pair
• Race-Trim Micro Stub Brake Kit, for 930 C.V. Joints
• Clamp, Thru Rod, Set of 4
• Heavy-Duty Axle Beam Thru Rods
• Steering Arm, Chrome, Small Shaft, Large Tie Rod End, 69-77, Each
• Steering Arm, Chrome, Small Shaft, Small Tie Rod End, 66-68, Each
• Steering Arm, Chrome, Large Shaft, Small Tie Rod End, 46-65, Each
• Tie Rod End Ford, 16 Thread Shank, Each
• S/S Misalignment Shim, Heim end, Each
• Shock Bolt w/ Nut, 12mm x 1.5, 100mm Long, 2 pcs.
• Shock Boss, Threaded 1/2”, 2" Long, Each
• Shock Boss, Threaded 12mm, 2" Long, Each
• Shock Boss, Unthreaded 12mm, 1-3/4" Long, Each
• Shock Boss, Unthreaded 1/2”, 1-3/4" Long, Each
• Combo Spindle Bearing, Outer, Each
• Combo Spindle Bearing, Inner, Each
• Rear Wheel Seal
• King Pin Conversion Bearing, Outer, Each
• Front Wheel Seal
• King Pin Conversion Bearing, Inner, Each
• Aluminum Link Pin Clamp Nuts, Pair
• Replacement Pads, Two Pair
• Micro Stub Replacement Caliper, w/o Pads
• Replacement Brake Pads, Set of 4
• Replacement Caliper w/ Pads, Each
• Spindle Nut, Right, 27mm Hex, M18 x 1.5 (RH) Thread, Each
• Spindle Nut, Left, 27mm Hex, M18 x 1.5 (LH) Thread, Each
• Lock Plate, Spindle Nut, Type 2 50-63, Each
• Lock Plate, Spindle Nut, Type 1 50-65, Ghia 56-65, Type 2 64-67, Each
• Spindle Nut Kit, Left & Right, 27mm Hex, M18 x 1.5 (LH & RH) Thread, Lock Plates
• Forged H.D. Link / King Pin Carriers Only, Pair
• Forged H.D. King Pin Spindle Kit
• OEM Caliper Bracket, Pair
• Bracket, Disc Brake Link Pin, Each
• Caliper Bracket, Rear, VW Swing Axle and IRS, Each
• Caliper Bracket, Front, VW Ball Joint Spindles, Left / Right, Each
• Link Pin Bushings, Set of 4
• Link Pin Shims, Set of 5
• Multi-Shock Link Pins, Pair
• Link Pin Spindle Gusset Kit, 4 pcs., Raw
• Chromoly Link Pins, Set of 4
• Beam Mounting Brackets, Pair
• Long Travel Shock Tower Kit (10") for Link Pin, Set, Raw
• Button Stud, Long Non-Ejecting, 13/32" x .600" Grip, Each
• Button Stud, Short Non-Ejecting, 13/32" x .550" Grip, Each
• Spring Only for Tabs, Each
• Wing-Nut, Non-Ejecting, Each
• Fastener Tab, Flat, Each
• Fastener Tab, Formed, Lightened, Each
• Fastener Tab, Formed w/ 3/8"- 24 Nutplate, Each
• Fastener Tab, Formed w/ 5/16"- 24 Nutplate, Each
• Fastener Tab, Flat w/ 5/16"- 24 Nutplate, Each
• Fastener Tab w/ Spring
• Self-Ejecting Button Only, 5/16" x 7/16" Grip
• Stainless Steel Clamp, Set of 4
• Bracket, Shock Reservoir, Pair
• Gusset, 90 Degree, .115" Thick, Set of 4
• Tab, Brake Lines, Pair
• Aluminum Billet Steering Damper Mount
• EMPI Aluminum Link Pin Beam, w/ Shock Towers
• Tab, Large, Set of 4
• Universal Mounting Tab for Reservoirs, Raw, Each
• Universal Tab, Set of 4
• Tab, Seat Belt, Set of 4
• Chromoly Tab, Seat Belt, Set of 4
• Chromoly Tab, Set of 4
• Chromoly Tab, Seat Mount Tall, Pair
• Chromoly Tab, Seat Mount Standard, Pair
• Universal Mounting Tab, 1/2" Hole
• Universal Mounting Tab, 3/8" Hole
• Aluminum Gas Tank Mounts, Fits 8" or 10", Pair
• 90 Degree Formed Mount Tab, 3/8" Hole, Set of 4
• Gusset, 90 Degree, .078" Thick, Set of 4
• 90 Degree Flat Gusset, Set of 4
• Oil Filter Adapter Mount, Each
• 1-1/2" Tube Shock Mount Tab, 7/16" Hole, Set of 4
• 1-1/2" Tube Tab, 5/16" Hole, Long, Set of 4
• 1-1/2" Tube Tab, 5/16" Hole, Short, Set of 4
• 1-1/4" Tube Tab, 5/16" Hole, Set of 4
• 1" Tube Tab, 1/4" Hole, Set of 4
• Flat Mount Tab, Set of 4
• Baja Hood Pin Kit w/ Lanyards, Pair
• Chrome Hood Hold Downs, Pair
• Rubber Hood Hold-Downs, Pair
• Chrome P/R Tube Protectors, Boxed, Pair
• Chrome Pulley Guards
• Flush Mount Access Flange & Cover
• Windshield Rubber for Chassis, 12 Ft.
• Replacement Bottom Seal for 18-1057 Windshield, 44 inch
• Replacement Seal for Windshield, 10ft
• Windshield Mounting Kit
• Upper Front End Supports, Raw, Pair
• Lower Front End Supports, Raw, Pair
• Chrome Tubular Rear Bumper
• Hardware Only, Front Bumpers, 2 pcs.
• Hardware Only, Firewall Mount, 4 pcs.
• Bumper Flange, 1-1/2" Tube
• Stainless Steel Baja Bumpers, Front, Fits Wide & Bug Eye
• Double Tube Bumper, Rear, Shock Tower Mount, (Raw)
• Baja Bumper, Rear, Shock Tower Mount, (Raw)
• Baja Bumper, Front, Fits Wide & Bug Eye (Raw)
• Universal Buggy Skid Plate
• Low Mount Baja Bars, 1-1/4" Tube, (Raw), Pair
• Porsche 912 Stock Head, Bare W/O Seats and Guides
• Roll Bar Pad, 10-Piece Box
• Show Bars, 4 Point, .1025" Wall Thickness, (Raw)
• Oil Press Sender, PSI, 1/8" - 27 NPT, 2-Pole
• Oil Press Sender 80 PSI, 1/8" - 27 NPT, 1-Pole
• Oil Press Sender 80 PSI, M10-1.0, 2-Pole
• Oil Press Sender, PSI, M10-1.0, 1-Pole
• Temp Sender 250 Degree, 1/8" - 27 NPT
• Temp Sender 250 Degree, M10-1.0
• Temp Sender 300 Degree, 1/4" - 18 NPT
• Temp Sender 300 Degree, 1/8" - 27 NPT
• Temp Sender 300 Degree, M10-1.0
• Temp Sender 300 Degree, M18-1.5 (Oil Press. Relief)
• Temp Sender 300 Degree, M16-1.5
• Temp Sender 300 Degrees, M14-1.5 (VW Drain Plug)
• Wiring Kit for Ammeter
• Push-On Connector Kit, 3-Prong
• Light Diffuser – Peanut, (4 pcs)
• Light Diffuser – 9/32”, (4 pcs)
• Light Diffuser – Red, 11/32”, (4 pcs)
• Insulated Bulb Socket, Peanut Style, Each
• Bulb, Large Peanut-Style, 4 pcs.
• Bulb, Peanut-Style, 4 pcs
• Socket for V600804, Each
• Bulb, 11/32" 12V/2W, 4 pcs.
• Bulb, 9/32" 12V/2W, 4 pcs.
• Anti-Glare Ring, 2-1/16”, Pack of 2
• Gauge Hole Cover, 2-1/16”
• Stud Mount Conversion Kit, 2-1/16"
• Stud Mount Conversion Kit, 3-1/8"
• Mount Cup, 2-1/16" w/ Long Housing, 2 pcs
• 3-Gauge Hole Panel
• 2-Gauge Hole Panel
• 2-Gauge/1-Tach Hole Panel
• 1-Gauge Hole Panel
• Metal Mount Bracket, 2-1/16", 3-Hole
• Metal Mount Bracket, 2-1/16", 2-Hole
• Metal Mount Bracket, 2-1/16", 1-Hole
• Black Analog Clock, 12V, 2-1/16" (52mm) Diameter
• Mini PSI Gauge, 1 ½” w/1/8" -27 NPT connections
• Oil Pressure Gauge, Cockpit Royale Series, 80 PSI
• Oil Temp Gauge, Cockpit Royale Series, 300 degrees
• Fuel Gauge, White Series, 10-180 OHMs
• Voltmeter Gauge, White Series, 8-16 Volts
• Turbo Boost, w/ Hardware, 25 PSI / 30 InHg
• Water Temp. Gauge, 0-250 Degrees
• Oil Pressure Gauge, White Series, 0-80 PSI
• Oil Temp Gauge, w/ Hardware & Sending Unit, 120-340F
• Speedometer, 160 MPH, MPH only, 3-3/8”
• Tubing Kit, 16' Long
• Tubing Kit, 6' Long
• Speedometer, 120 MPH, MPH only, 3-1/8”
• Inductive Sender for VDO Speedometers Only
• Electric Speedo-to-Cable Conversion Kit
• Vision (Flat Edge) Speedometer 140Mph/220Km, 3-15/16"
• Empi Valve Adjusting Screw & Nut Kit (Set of 8), Type 1, 2, & 3
• Empi Stock-Style Dual Port End Casting Kit, Type 1, 2 & 3
• Empi Chrome 36HP Fan Shroud With Ducts
• Chrome Sump Plate with Chrome Drain Plug
• Hour Meter Gauge
• Fuel Tank Sender, VW
• Fuel Gauge, 73-10 OHMs
• Mount Kit for V2-2600-1
• Fuel Tank Sender, Universal 5-Bolt Pattern, (10 OHMs Empty, 180 OHMs Full) Adjustable 6" - 23"
• Fuel Gauge, 10-180 OHMs
• Voltmeter Gauge, 8-16 Volts
• Ammeter Gauge, w/ Hardware, 30 AMP
• Pyrometer Kit, w/ Hardware & Sending Unit, 1600 Degrees
• Boost Gauge, w/ Hardware, 0-30 PSI
• Water Temp Gauge, 250 Degrees
• Oil Temp Gauge, 300 Degrees
• Oil Pressure Gauge, 0-150 PSI
• Oil Pressure Gauge, 0-80 PSI
• Oil Pressure Gauge, w/ Hardware, Mech., 0-100 PSI
• Battery Isolator Switch w/ seal, Set
• Super Indicator Light
• Standard Size Indicator Light
• Sealed Toggle Switch, On/Off/On (2-Pole)
• Sealed Toggle Switch, Molded, Off/On/Momentary-On
• Sealed Toggle Switch, Off/On/On
• Sealed Toggle Switch, Molded, On/Off
• Momentary Push Button Starter Switch, Sealed
• 12-Volt Horn, Each
• 6-Volt Horn, Each
• 12-Volt Wiper Motor, Type 1, 72-77, 72 S/B, Boxed
• Switch, Emergency Flasher, 7-Prong, S/B 71-72, Type 1 68-73, Ghia 68-73, Type 2 68-72, Type 3 68-72, Each
• Interior Light Door Contact Switch, Left Door
• Turn Signal Flasher Relay, 12-Volt, 3-Prong, Fits Type 1 71-79, Ghia 71-74, Type 3 71-73, Type 4 69-74, Type 2 71-79, Thing 73-74, and Vanagon 80-91
• Turn Signal Flasher Relay, 12-Volt, 4-Prong, Type 1 68-70, Fits Type 1 68-70, Ghia 68-70, Type 3 68-70, Type 2 68-70, and Thing 73-74
• Universal Turn Signal Switch
• Turn Signal Switch, Type 2 74-79
• Turn Signal Switch, Type 1 72-79
• Turn Signal Switch, Type 1 71
• Turn Signal Switch, Type 1 68-70
• Turn Signal Switch, Type 1, 62-67, Ghia, 62-67, Black
• Hard-Start Relay Kit
• Ignition Switch, Type 1 72-74
• Universal Ignition Switch w/ Keys for 6 or 12-Volt Systems
• Ignition Switch w/ Keys, Type 2 71-79
• Ignition Switch w/ Keys, Type 2 55-67
• Ignition Lock Cylinder, w/ Keys, Type 1 68-70, Ghia 68-70, Type 3 68-70, Each
• Ignition Switch (6 Contact Terminals), Type 1 74-79, Ghia 73-74, Type 2 74-79, Vanagon 80-92, Each
• Ignition Switch (Electrical Only), All 68-70
• Ignition Switch w/ Keys, Type 1 58-67
• Bulb Socket with Push-In Connector. Used in Instrument Panel, All Years
• Switch, Back-up Light, Type 1 66-79, Ghia 66-74, Type 2 67-79, Type 3 66-73, Each
• Brake Light Switch, 2-Prong
• Brake Light Switch, 3-Prong
• Headlight Dimmer, Metal Housing Switch, Type 1 50-65, Ghia 54-65, Type 2 50-65, Each
• Relay, headlight (12-Volt), 5 Prong, Type 1 67-79, Ghia 67-74, Type 2 67-79, Type 3 67-73, Each
• Headlight Switch, 6-Prong, Type 2 71-79
• Headlight Switch, 6-Prong, Type 1, and S/B 73-79
• Headlight Switch, 8-Prong, Type 1 71-77
• Headlight Switch, 6-Prong, Type 1 68-70
• Headlight Switch, 6-Prong, Type 1 58-67, Ghia 58-67, Type 2 68-70, Type 3 64-67
• Fuel Gauge Stabilizer, Each
• Mini/Micro Light Mount Bracket, Type 1 thru 73, Pair
• Mini LED Tail Light Red/Red/Amber, Each
• Replacement Single Filament 12-Volt Bulb, 2 pcs.
• Micro-Mini Chrome Lights
• Replacement Dual Filament 12-Volt Bulb, 2 pcs.
• Mini Chrome Lights
• 6-Panel Fuse Box Only
• Universal Wire Harness w/ Fuse Box
• Weather-Proof G.M. Style Fuse Box
• Fuses
• Fuse Kits
• Fuse Box Clip, Type 1 61-67, Ghia 61-71, Type 2 61-67
• Fuse Box, w/ Clear Cover, F/8 Fuses, Type 1 61-66, Ghia 61-66
• Wiper Conversion Kit, Each
• Voltage Drop, Each
• Turn Signal Lens, Left & Right, Type 3 70-73, Amber, Each
• Turn Signal Lens, Bullet, Ghia 59-64 / Type 3 62-63, 68-69, Clear, Each
• Turn Signal Lens, Bullet, Ghia 59-64 / Type 3 62-63, 68-69, Amber, Each
• Tail Light Lens, Type 3 70-73, Ghia 72-74, Each
• Tail Light Lens w/ Chrome Ring, Ghia 60-69, 100% Red, Each
• Tail Light Lens, Type 3 64-69, Each
• T/L Lens, Left & Right, Type 2, 72-79, Amber/Red/White, Each
• T/L Lens only, Type 2, 62-71, Red, Each
• T/L Lens Only, Type 2, 62-71, Amber/Red, Each
• Turn Signal Lens - Amber, Type 2 73-79, Left/Right, Each
• Turn Signal Lens, Left & Right, Type 2 68-72, Each
• Turn Signal Lens - Amber, Type 2 63-67, Each
• Bulb Holder, Rear Side Marker, Type 2, 70-79, Each
• Front Side Reflector Base, Type 2, 70-79, Each
• Side Marker Lens, Type 2, 75-79, Red/Black Trim, Each
• Side Marker Lens, Type 2, 70-74, Red/Silver Trim, Each
• Side Marker Lens, Type 2, 75-79, Yellow/Black Trim, Each
• Side Marker Lens, Type 2, 70-74, Yellow/Silver Trim, Each
• Early H/L Lens, Vintage Euro Style, Type 2, 50-67, Glass, Each
• T/L Side Reflector, Type 1, 70-72, Each
• T/L Lens, 73-79, Euro Style, Amber/Red/White, Each
• T/L Lens, 71-72, Red/White, Each
• T/L Lens, 71-72, Euro Style, Each
• T/L Lens, Left & Right, 68-70, Red/White, Each
• T/L Lens, Left & Right, 68-70, Euro Style, Amber/Red/White, Each
• T/L Lens, Left & Right, 62-67, Red, Each
• T/L Lens, Left & Right, 62-67, Euro Style, Each
• Turn Signal Lens, Type 1, 70-79, Amber, Each
• Turn Signal Lens, Type 1, 70-79, Clear, Each
• Turn Signal Lens, Left & Right, 68-69, Amber, Each
• Turn Signal Lens, Left & Right, 64-66, Amber, Each
• Turn Signal Lens, Left & Right, 64-66, Clear, Each
• Turn Signal Lens, Left & Right, 58-63, Amber, Each
• Turn Signal Lens, Left & Right, 58-63, Clear, Each
• Turn Signal Lens, Left & Right, Type 1 55-57 / Type 2 56-62, Clear, Each
• Early H/L Lens, Left & Right, thru 66, Porsche 911 Style, Glass, Each
• Early H/L Lens, Left & Right, thru 66, Vintage Euro Style, Glass, Each
• Early H/L Lens, Left & Right, thru 66, Cibie Style, Glass, Each
• Early H/L Lens, Left & Right, Type 1 thru 66, Type 2 thru 67 Glass, Each
• T/L Assy., Left & Right, Amber/Red/White, 72-79, Each
• T/L Assembly, Left & Right, Red, Type 2, 62-71, Each
• T/L Assembly, Left & Right, Universal, 73-79, Each, Without 3 bulbs
• T/L Assembly, 68-70, Euro Style
• T/L Assembly, Left, 62-67, Red
• T/L Assembly, 62-67, Euro Style
• Turn Signal Assy., 70-79, Amber
• Turn Signal Assy., Left & Right, 64-66, Amber, Each
• Turn Signal Assy., Left & Right, 58-63, Clear, Each
• Turn Signal Assy., Left & Right, 58-63, Amber, Each
• Replacement Headlight Bulbs - H4
• Blue Dot w/ Chrome Ring, Pair
• Red Teardrop Tail Lights, Pair
• License Plate Light w/ Seal
• Back-Up Light Assy., Type 2 57-71, Each
• Back-Up Light Lens Only, Type 1 64-67, Ghia 69-71, Type 3 67-69, Type 2 57-71, Each
• Back-Up Light Assy., w/ Right Bracket & Boot, Type 1 64-67, Ghia 69-71, Type 3 67-69, Each
• Back-Up Light Assy., w/ Left Bracket & Boot, Type 1 64-67, Ghia 69-71, Type 3 67-69, Each
• 7” Sealed Beam High/Low Bulb Only, 12-Volt, Each (Boxed)
• 7” Sealed Beam High/Low Bulb Only, 6-Volt, Each (Boxed)
• 7" H4 Headlight - Round, Each
• H.D. 3-Prong Headlight Pigtail / Connector
• Screw, Headlight Rim (Chrome), Each, Type 1 67-79, Type 2 68-79, Type 3 64-73
• Headlight Rims, Chrome, 67-79
• Headlight Retaining Unit, 67-79, Each
• Retainer Spring, Headlight Glass, Type 1 50-67, Type 2 50-67, Each
• Gasket, Headlight Assembly, Type 1 50-66, Type 2 50-67, Each
• Gasket, Headlight Lens, Type 1 50-66, Type 2 50-67, Grey, Each
• Chrome, Type 1 & 2, Adjusting Screws at 2 & 7 O'Clock
• Headlight Rim, Chrome, Type 1 & 2, Adjusting Screws at 5 & 7 O'Clock
• Headlight Assembly, Type 1 & 2, thru 66, Each
• Bolts and Pan Washers for one pan half, Set
• Chrome Plated Emergency Brake Handle, Type 2 68-79
• Billet Style E-Brake Cover
• Gear Shift Knob, Ivory, 7mm
• Gear Shift Knob, Ivory, 10mm
• Billet Aluminum Shift Knob, 3/8-24 threads, Round
• Billet Aluminum Round Style Shift Knob; 7, 10, and 12mm threads.
• EMPI Shift Pattern Gear Shift Knobs
• EMPI Logo Gear Shift Knobs
• Polished Aluminum Cup Holder, Type 2 55-67
• Wire Basket, Type 2 55-67
• Wire Hump Basket, Type 1
• Center Console, 49-79 Type 1, 56-74 Ghia, All year Type 3 & Thing
• Type 1 68-79 Sedan / Convertible Center Console
• Rear Speaker Shelf
• Universal Wiper/Washer Kit
• Rear Hatch Hinge Cover, Type 2 68-79
• Seat Release Knob, Each
• Trim for Seat Back Rest Knob, Each
• Seat Back Release Knob (Set for 1 Seat), Kit, Type 1 68-79, Ghia 68-74, Type 3 68-73
• Seat Clamp Kit, Rear Seat to Floor, Type 2 52-72
• Seat Clamp Kit, Middle Seat to Floor, Type 2 52-72
• Guide Piece Kit (6 pcs.), Seat Rails, Type 1 73-79
• Hook, Safety Belt, Black Plastic, Each, Type 1 68-72, Type 2 68-79, Type 3 67-73
• Bamboo Style Tray, Type 1 Sedan (Exc. S/B)
• Grab Handle, 61-67, Each
• EMPI Universal Door Puller, Pair
• 5-Hole to 3-Hole Steering Wheel Adapter, Front Mount, 2-pc Kit
• Billet Aluminum Hub Cover, All Wheels
• 10" Polished Aluminum "Vortex" Steering Wheel
• Steering Wheel Adapter Kit, Two-inch Aluminum extension, 5-hole to 3-hole
• Steering Wheel Adapter Kit, One-inch Aluminum extension, 5-hole to 3-hole
• Steering Wheel Adapter Kit, Two-inch extension, 3-hole to 3-hole
• Classic Foam, Black, 3 soild spoke, 10-¼” dia., 2-½” dish / 2-⅞"
• Classic Foam, Chrome, 3 spoke, 11-½” dia., 3-¾” dish / 3-¾"
• Classic Foam, Chrome, 3 spoke, 8-½” dia., 4-½” dish / 5-¼"
• Classic Foam, Chrome, 4 spoke, 13” dia., 1-¾” dish / 2"
• Classic Foam, Chrome, 4 spoke, 11-½” dia., 3-¾” dish / 3-¾"
• Formula GT, Silver, 3-Spoke, 11-¾” Dia., 3” Dish / 3-½"
• Formula GT, Polished, 3-Spoke, 13” Dia., 3” Dish / 3-⅜"
• Formula GT, Black,3-Spoke, 12” Dia., 3” Dish / 3 ¾"
• Formula GT, Black, 3-Spoke, 13” Dia., 3” Dish / 3-½"
• Rally GT, Silver, 4-Spoke, 14” Dia., 3-¾” Dish / 3-¾"
• Rally GT, Black, 4-Spoke, 14” Dia., 3-¾” Dish / 3-½"
• Rally GT, Silver, 3-Spoke, 13” Dia., 3” Dish / 3-¼"
• Rally GT, Black, 3-Spoke, 13” Dia., 3” Dish / 3-⅜"
• GT Sport Thick Foam, 13" Dia., 3.50" Dish / 4-⅛"
• EMPI Steering Wheel Adapter Kit, Type 1 75-79, Type 2 74-79, All other VW Models 75-88, I.D. Spline Area .652, O.D. Spine Area .680, 40 Splines
• EMPI Steering Wheel Adapter Kit, Type 1 and Ghia 49-59, I.D. Spline Area .863, O.D. Spine Area .982, 24 Splines
• EMPI Steering Wheel Adapter Kit, Type 1 and Ghia 60-74½, Type 3 61-71, I.D. Spline Area .795, O.D. Spine Area .835, 40 Splines
• EMPI Poly-Foam Steering wheel, 3 Spokes, 14-¾” Dia., 4” Dish / 4-¼”
• EMPI Poly-Foam Steering Wwheel, 3 spokes, 12-½” Dia., 3-½” Dish / 3-⅛”
• EMPI Poly-Foam Steering Wheel, 3 spokes, 10” Dia., 5-½” Dish / 5-½”
• EMPI Poly-Foam Steering Wheel, 3 spokes, 13-½” Dia., 3-½” Dish / 3-½”
• EMPI Polished Billet Aluminum Steering Wheel Boss Kit Only, Fits Type 2 68-73
• EMPI Polished Billet Aluminum Steering Wheel Boss Kit Only, Fits Type 2 55-67
• 457mm Type 2 Wood Steering Wheel Only
• EMPI Polished Billet Aluminum Steering Wheel Boss Kit Only, Fits Type 1 75-79, Type 2 74-79
• EMPI Polished Billet Aluminum Steering Wheel Boss Kit Only, Fits Type 1 & Ghia 60-74 1/2, Type 3 61-71
• EMPI Polished Billet Aluminum Steering Wheel Boss Kit Only, Fits Type 1 & Ghia 49-59
• EMPI 380mm/23mm Grip Dark Classic Wood Steering Wheel
• EMPI 380mm/23mm Grip Classic Wood Steering Wheel
• EMPI 380mm/31mm Grip Dark Classic Wood Steering Wheel
• EMPI 380mm/31mm Grip Classic Wood Steering Wheel
• "Banjo" Steering Wheel Horn Button
• "Banjo" Steering Wheel Boss Kit, 3-Bolt Mount w/ 40 Splines, Fits Type 1 & Ghia 60-74 1/2, Type 3 61-71
• "Banjo" Steering Wheel Boss Kit, 3-Bolt Mount w/ 24 Splines, Fits Type 1 & Ghia 49-59
• "Banjo" Style Vintage Steering Wheel Kit
• EMPI Complete Horn Button Kit, Black
• EMPI Complete Steering Wheel Kit, Ivory
• EMPI Complete Steering Wheel Kit, Silver / Grey
• EMPI Complete Steering Wheel Kit, Black
• Convex Rear View Mirror, 17"
• Convex Rear View Mirror, 13-5/8"
• Aluminum Mirror Mount, Flat, Pair
• Aluminum Mirror Mount, Clamp on for 1-1/2" Tubing, Pair
• Aluminum Mirror Mount, 1-1/2" Radius, Pair
• Aluminum 5-Panel R/V Mirror, 30" Wide
• Aluminum 4-Panel R/V Mirror, 24" Wide
• Aluminum 3-Panel R/V Mirror, 18" Wide
• Replacement Hardware Kit Only for 4580
• 5-Panel Mirror, Complete with Hardware
• Universal Vent Locks, Pair
• Vent Wing Lock, Type 1 68-77 (Sedan Only)
• Vent Wing Lock, Type 1 65-67, Type 3 62-67
• Vent Wing Lock, Type 1 52-64 & Convertible 52-67
• Rear View Mirror, Day/Night, Type 2, 69-79, Metal Coated with Black and White Plastic
• Rear View Mirror, Day/Night, Type 1 Sedan, 68-77, Metal Coated with Black Plastic
• Rear View Mirror, O.E. Style Type 1 Sedan, 65-67, Chrome Plated Metal
• Rear View Mirror, O.E. Style Type 1 Sedan, 58-64, Chrome Plated Metal
• Rear View Mirror, Type 1 Sedan, thru 57, Chrome Plated Metal
• Sun Visor Clips, Type 1, 68-79, Pair
• Sun Visor Clips, Type 1, 65-67, Type 2, 68-79, Pair
• Sun Visors, 68-79, Ivory, Pair
• Sun Visors, 65-72 Conv., Pair
• Sun Visors, 65-77 Type 1, 73-79 Conv., Pair
• Sun Visors, 58-64, Pair
• Door Sill Cover Set, Aluminum, w/ EMPI Pressed into it, Pair (Boxed)
• Door Pillar Trim Set, Stainless Steel, Pair
• Door Corner Trim Set, Stainless Steel, Pair
• Sunroof Material
• Headliner Kits
• Lady Bug Floor Mats, Colored, Rear, Pair
• Lady Bug Floor Mats, Colored, Front, Pair
• Tar Boards, Set of 4 (Boxed)
• EMPI Floor Mats w/Blue & White Logo, Rear, Pair
• EMPI Floor Mats w/ Blue & White Logo, Front, Pair
• EMPI Trunk Carpet Kits
• EMPI Rear Well & Cargo Area Carpet Kits
• EMPI Type 1 Convertible Carpet Kits
• EMPI Type 1 Super Beetle Carpet Kits
• EMPI Type 1 Sedan Carpet Kits
• Under Dash Stereo / Gauge Panel
• Hidden Stereo Glove Box, Type 1, 58-64
• Glove Box Lock, Type 1 68-77, S/B 71-72
• Glove Box Door Frame
• Rubber Bumpers
• Glove Box, Karmann Ghia, All
• Glove Box, Type 2 68-77
• Glove Box, Type 1 68-77, S/B 71-72
• Glove Box, Type 1 65-67
• Glove Box, Type 1 58-64
• Glove Box, Type 1 52-57
• Dash Cover, S/B & Convertible, 73-79
• Replacement Knee Pads, Ghia, 72-74
• Replacement Knee Pads, Ghia, 68-71
• Replacement Dash, Ghia, 71-74
• Replacement Dash, Ghia, 1970
• Replacement Dash, Ghia, 68-69
• Replacement Dash, Ghia, 58-67
• Replacement Dash, Type 3, 64-73
• Replacement Dash, Type 1, 71-76, 71-72 S/B
• Replacement Dash, Type 1, 68-70
• Billet Dash, 4 Small, Each
• Billet Dash, 3 Small, Each
• Billet Dash, 2 Large, 4 Small, Each
• Billet Dash, 1 Large, 4 Small, Each
• Billet Dash, 1 Large, 3 Small, Each
• Billet Dash, 1 Large, 2 Small, Each
• Billet Dash, 2 Small, 1 Large, 2 Small, Each
• Billet Dash, 1 Small, 1 Large, 1 Small, Each
• Headlight Switch Insert, Each, Type 1 68-77, S/B 71-72
• Dash Knob, Black, Type 1 1968-1972, Each
• Wiper Switch Knob, Black, Type 1 68 & later, Each
• Dash Switch Threaded 10mm Nut, Each
• Dash Switch Threaded 14mm Nut, Each
• Wiper Switch Knob, Grey, Type 1 62-66, Each
• Dash Knob, Ivory, Type 1 to 1966, Each
• Air/Heater Vent Diffuser, Type 2, Each
• Air Vent, Fits both Left and Right Sides, Type 1 Standard 71-77, Each
• Finger Pull, Fuel Door Release, Each, Type 1 71-72, Super Beetle 71-79
• Finger Pull, Fuel Door Release, Each Type 1 69-72, Ghia 69-74
• Chrome Plated Dash Grab Handle, Type 2, 1967 & Earlier
• Dash Grab Handle, Type 2 68-79
• Grab Handle, Door, Type 2 1968 to 1979
• Sunroof Handle Guard Plate, White
• Crank Handle for Sunroof, Silver/Grey Color, Type 1 68-77
• Push-on terminals, 1970-77 Type 1 (Exc. Convertible).
• Sliding Door Handle, Inside, Black
• Door Handle, Inner, Chrome, Type 2 50-67, Each
• Escutcheon, Chrome Plated Plastic, Door Pull, Each
• Finger Plate, Inside Door Handle, Black, Each
• Inside Door Handle, Black, Type 1 67-79
• Door/Window Handle Tension Spring, Type 1 All, Each
• Window Handle Escutcheon (Buffer), 56-67, Pair
• Window Crank, 56-67, Each
• Retaining Pins for Window Crank/Door Handle, Type 1, thru 67 (4 pcs.)
• Window Crank Escutcheon (Buffer), Black, Each
• Window Crank, Metal Backed, H.D., Black, 68-74, Each
• Window Crank, Metal Backed, Black, 75-79, Each
• Door Handle, Chrome, 56-66, Each
• Window Cranks, 68 & Later, Pair
• Window Cranks, thru 67, Pair
• Door Handles, thru 66, Pair
• Door Lock Pulls, Black, 67-79, Pair
• Coat Hooks, Type 1 68-77
• Coat Hooks, Type 1 61-67
• Assist Straps, Type 1 68-77
• Assist Straps, Type 1 58-67
• Collar for Door Lock Knob / Pull, Black
• Door Lock Knobs, Black, H2O Cars
• Door Lock Knobs, Black, All Air-Cooled
• Door Hinge Oil Hole Plugs, Black
• Door Hinge Screw Plugs, Clear Plastic
• Door Check Rod Seals, Black
• Door Switch Seals, Black
• Billet Style Door Lock Pulls, 67-79, Pair
• Billet Style Window Cranks, All Models, All Years, Pair
• Billet Style Door Handles, Type 1 & 3, thru 66, Pair
• Billet Seat Slider Knob, Pair
• Billet Door Pulls, O.E. Style, Pair
• Billet Shift Knob, 7/10/12mm Threads, Each
• Billet Hood Pull Knob, Type 1, thru 68, Each
• Billet Heater Knob, Type1, thru 64
• Billet Radio Knobs, Push-on, Pair
• Billet Dash Knob, 5mm, Each
• Billet E-Brake Button, All Years
• Billet Buffer Rings, Type 1, thru 66, Set of 4
• Billet Knob Window Cranks, Type 1, thru 66, Pair
• Brackets for Armrest, Pair
• Armrest, Type 1 & S/B 73-79, Black, Pair, Boxed
• Armrest, Type 1 & S/B 68-72, Black, Pair, Boxed
• Armrest, Type 1 58-67, Black, Pair, Boxed
• Door Panel Clip Boots
• Door Panel Clips
• Kick Panel Set, Left & Right, Black, Pair
• Front Speaker Kick Panels, Pair
• Aluminum Dash Panel, Type 1, 58-64
• Aluminum Rear Quarter Panels, Type 1, Pair
• Aluminum Front Door Panels, Type 1, Pair
• 4-Piece Universal Door Panel Kit, Type 1 & S/B 65-77, Black (Exc. Conv.)
• 4-Piece Panel Kit, 58-64, Black
• 3 Point Rectractable Seat Belt/Harness with Hardware, Pair
• 2 Point Retractable Lap Seat Belt With Push Button Latch w/ Hardware, Black, Pair
• 2 Point Lap Seat Belt With Chrome Latch Buckle w/ Hardware, Universal 72", Each
• 2 Point Lap Seat Belt With Push Button Latch w/ Hardware, Universal 72", Each
• Foam Rear Seat Backrest, Each
• Foam Rear Seat Base, Type 1 56-79, Each
• Foam Front Backrest, Type 1, Each
• Foam Front Seat Bottoms, Type 1 & S/B 56-76
• Molded Foam Seat Pads, 2-Piece Kits
• Vinyl Seat Covers - Slip-On Style
• Seat Sliders Kit Only, w/ Hardware For 1 Seat Only, Pair
• Bolt-In Seat Mount Adapter Kit w/ Sliders, Wire, & Instructions, Type 1 & S/B 73-79, Fits Either Left or Right Front, Each
• Bolt-In Seat Mount Adapter Kit w/ Sliders, Wire, & Instructions, Type 1 & S/B 71-72, Fits Either Left or Right Front, Each
• Bolt-In Seat Mount Adapter Kit w/ Sliders, Wire, & Instructions, Type 1, 56-70, Front, Each
• Rear Seat Covers Only, Fits Type 1 58-76
• Low-Back Seat w/ Headrest Only, Right Side, Black Vinyl, Each
• Low-Back Seat w/ Headrest Only, Left Side, Black Vinyl, Each
• Low-Back Seat Only, Right Side, Black Vinyl, Each
• Low-Back Seat Only, Left Side, Black Vinyl, Each
• Replacement Roof Rack Brackets, Pair
• Replacement Complete Hardware Kit Only
• Deluxe Car Cover, Type 2 Camper, 68-92
• Deluxe Car Cover, Type 2 Bus, 73-79
• Deluxe Car Cover, All Karmann Ghia (w/ Mirror Pockets)
• Mirror, Ghia 66 & Later, Each
• Mirror, Type 2, 68-79, Grey trim around glass
• Mirror, Type 2 to 67, Each
• Mirror, Type 1, Convertible, 68 & Later
• Mirror, Type 1 Sedan, 68 & Later, Black trim around glass
• Mirror, Type 1, thru 67, Oval
• Mirror, Type 1, thru 67, Round
• Mirror Hinge Pin, Black, Type 1, 49- 67, Each
• EMPI Mini Sprint Mirror
• Mini Spyder Style Mirror, Left or Right, Each
• Antenna, Dual Base, Sidemount w/ Chrome Mounts (60" Cable)
• Antenna, Ghia Basemount (48" Cable)
• Antenna, Type 1 67-79 (48" Cable)
• Antenna, Sidemount, Type 1 & Type 2 (48" Cable)
• Lock and Cable for Car Covers
• Windshield Spray Nozzle, Type 2 68-79
• Windshield Spray Nozzle, Pair, Type 1 60-79, Ghia 61-74, Type 3 64-73
• Cap, Windshield Wiper Shaft, Each, Type 1 73-79, Ghia 70-74, Type 2 73-79, Type 3 70-73
• Protective Cover, Windshield Wiper Shaft, Each, Type 1 70-79, Ghia 70-74, Type 2 69-79, Type 3 70-73
• Wiper Shaft Grommet, Each, S/B 73-79, Vanagon 80-91
• Wiper Shaft Grommet, Type 2 55-67, Each
• Wiper Shaft Ferrule, Each, Type 1 70-77, Ghia 68-74, S/B 71-72, Type 2 69-79, Type 3 64-73
• Wiper Shaft Grommet, Each, Fits Type 1 58-69, Ghia 58-69, Type 3 62-69
• Wiper Arm Cap Nuts
• Chrome Emblems
• Seal/Retainer, Emblem, Type 1 60-77, Each
• Clip/Retainer, Decklid Script, Type 1 67-74, Each
• EMPI Emblems
• Wire Cover, Karmann Ghia
• Wire Cover, Type 1 68-77 (Exc. S/B)
• Wire Cover, Type 1 55-67
• Spare Tire Cover / Toolbag, each
• EMPI Spare Tire Tool Box
• Trunk Liner, Type 1, 68-77 (Exc. S/B)
• Trunk Liner, Type 1, 61-67
• Firewall Insulation Kit, 3 pcs. (5.0mm thick)
• Karmann Ghia 5-Piece Aluminum Firewall Kit
• Type 1, 3-Piece Aluminum Firewall Kit
• 3-Piece Firewall Kit, Each
• 3-Piece Firewall Kit, Louvered, Each
• Molding Clip, Type 1 Convertible, 50-64, Ghia 56-71
• Molding Clip, Type 1, Fits both standard and S/S moldings, 67-79
• Molding Clip, Type 1, Fits both standard and S/S moldings, 52-66
• 7-Piece Molding Kit
• EMPI Deck Lid Rain Deflector w/ Hardware, All Type 1
• EMPI USA License Plate Frame, Each
• Cover, Front Hood Spring, Black Plastic, Each Type 1 62-77
• Rubber Stop, Decklid, Type 1 67-79, Each
• Deck Lid Quick Release Clips, Pair
• Deck Lid Stand-Offs w/ Hardware, Pair
• Decklid Hinge Bracket, M6-1.0 Threaded, Type 1 1950-79
• Billet Aluminum Deck Lid Stand-Offs, Type 1, Each
• Deck Lid Spring for Ghia, 56-74
• Chrome Deck Lid Brackets, Pair
• Chrome Deck Lid Spring, Each
• Chrome Hood Hinges, Pair
• Front Hood Gas Struts, Type 1 except 73-1/2-79 S/B, Pair
• Van Air Scoops, Type 2, thru 67, Pair
• Step Rubbers for Bumpers, Type 2, Pair
• EMPI Billet Aluminum Step, 3/8" x 24 Thread, Pair
• Type 2 Side Step w/ Bracket, Pair
• Type 2 Aluminum Side Step, Fits Type 2 50-79
• Spare Tire Mount Only w/ Hardware
• EMPI Replacement Cover
• Spare Tire Kit - Type 2
• Mud Flaps, Type 2, thru 72, Pair
• EMPI Mud Flaps, Type 1, Pair
• Fender Guards, Rear, Aluminum, Type 1, Pair
• Fender Guards, Front, Aluminum, Type 1, Pair
• Fender Guards, Rear, Stainless Steel, Type 1, Pair, w/ Plastic Trim
• Fender Guards, Front, Stainless Steel, Type 1, Pair, w/ Plastic Trim
• Vintage Fender Guards, Stainless Steel, Rear, Type 1, Pair, w/ Hardware
• 4-Piece Grille Set, Aluminum, Type 1
• 2-Piece Grille Set, Aluminum, Type 1
• Quarter Grilles, Black Plastic, Type 1, 71-on, Pair
• Chromed Plastic Quarter Vent Grilles, Type 1 71 & Later, Pair
• Rear Air Intake Grille, Aluminum, Type 1, 72-77 (42 Slots)
• Rear Air Intake Grille, Aluminum, Type 1, 65-71 (50 Slots)
• Front Hood Grille, Aluminum, Type 1, 73-79, S/B (19 Slots)
• Front Hood Grille, Aluminum, Type 1, 68-77, 71-72 S/B (19 Slots)
• 3-Bar Horn Grille, 52-72, Each
• Horn Grille, Type 1, 52-67, Left or Right, Each
• Hood Handle Guard, Aluminum, Type 1, 68-on, Includes Gasket
• Hood Handle Guard, Stainless Steel, Type 1, thru 67, Includes Gasket
• Door Handle Guard, Aluminum, Type 1, 71-on, Pair
• Door Handle Guard, Aluminum, Type 1, 68-70, Pair
• Door Handle Guard, Stainless Steel, Type 1, 68-70, Pair
• Door Handle Guard, Stainless Steel, Type 1, 60-67, Pair
• Door Handle Guard, Stainless Steel, Type 1, 56-59, Pair
• Striker Plate, Right, 2 Hole Design, Each Type 2 67-79, Thing 73-74
• Striker Plate, Left, 2 Hole Design, Each Type 2 67-79, Thing 73-74
• Striker Plate, Right, Each Type 1 68-77, Type 3 67-73
• Striker Plate, Left, Each Type 1 68-77, Type 3 67-73
• Striker Plate, Right, Type 1 60-64, Each
• Striker Plate, Left, Type 1 60-64, Each
• Door Release Mechanism, Right, Type 1 56-64, Each
• Door Release Mechanism, Left, Type 1 56-64, Each
• Door Lock Mechanism, Right, Type 1 56-64, Each
• Door Lock Mechanism, Left, Type 1 56-64, Each
• Door Check Rod Assembly, Left/Right, Type 1 62-79, Sedan, Convertible, S/B
• Deck Lid Lock w/ Keys, Type 2, 67-71
• Deck Lid Lock w/ Keys, Type 2, 55-63
• Deck Lid Lock w/ Keys, Type 1, 72-79
• Deck Lid Lock w/ Keys, Type 1, 67-71
• Deck Lid Lock w/ Keys, Type 1, 65-66
• Deck Lid Lock w/ Keys, Type 1, thru 64
• Receiver, Front Apron, Type 1 68-79
• Receiver, Front Apron, Type 1 thru 67
• Hood Lock Pin, Type 1 68 & Later
• Hood Lock Pin, Type 1 thru 67
• Hood Handle, Type 1 68 & Later
• Hood Handle, Type 1 thru 67
• Door Handle, Left or Right, Type 2 69-79, Each
• Side Door Handle, Type 2 55-67, Each
• Keyed Alike Door Handles, 68 & Later, Pair
• Outer Door Handle w/ Keys, Left or Right, 68 & Later, Each
• Door Handle, Non-Locking, Type 1 60-64, Each
• Keyed Alike Door Handles, 60-64, Pair
• Decklid Handle Seal, Type 1 72-79, Type 2 67-79, Thing 73-74, Each
• Decklid Handle Seal, Type 1 65-71, Type 2 66-67, Each
• Door Handle Seals, Type 2 64-68, Set of 4
• Door Handle Seals, Type 2 69-79, Set of 4
• Door Handle Seals, Type 1 68-79, Set of 4
• Door Handle Seals, Type 1 60-65, Set of 4
• Hood Handle Seals, Clear, Type 1 68-79, Set of 2
• Belly Pan Gasket, Each
• Rear Deck Lid Seal, All
• Front Hood Seal, 73-79 S/B
• Front Hood Seal, All Std. Type 1 & 71-72 S/B
• Seal, Bell Housing, Type 1 50-79, Ghia 56-74, Type 2 55-71.
• 5.518" Stock Replacement 2.0L VW Type 4 Rod Set
• Engine Compartment Seal, Type 1 75-79
• Engine Compartment Seal, Type 1 67-74
• Engine Compartment Seal, Type 1 thru 66
• License Light Seal, 67-79, Each
• License Light Seal, 64-66, Each
• License Light Seal, 58-63, Each
• License Light Seal, 52-57, Each
• Tail Light Seals, Type 2 62-71, Each
• Tail Light Seals, 71-72, Pair
• Tail Light Seals, 68-70, Pair
• Tail Light Seals, 62-67, Pair
• Turn Signal Lens Seal, Type 2 73-79, Pair
• Turn Signal Lens Seal, Type 2 68-72, Pair
• Turn Signal Seals, Type 1 70-79, Pair
• Turn Signal Seals, w/ Wiring Tubes Incl., Type 1 64-69, Pair (4 pcs.)
• Turn Signal Seals, w/ Wiring Tubes Attached, Type 1 58-63, Pair
• Fender Beading, Black, Each
• Fender Beading Kit w/o Notches, 25', Black
• Fender Beading Kit
• Fender Beading, Black, Skinpacked, Pair
• Rear Axle Seal Kit
• Rear Wheel Seal, Type 2, 68-79
• Bushing, Spring Plate, Left/Inner, Right/Outer, Type 1 60-68, Ghia 60-68, Type 3 64-67, Each
• Bushing, Spring Plate, Outer, Type 1 69-79, Ghia 69-74, Type 3 68-73, Each
• Bushing, Spring Plate, Left/Outer, Right/Inner, Type 1 60-68, Ghia 60-68, Type 3 64-67, Each
• Torsion End Plate, Stainless, Swing Axle, Pair
• Chrome Spring Plate Caps - I.R.S., Pair
• Chrome Spring Plate Caps - Swing Axle, Pair
• Axle Spacer Kit for Swing Axle, 4 pcs.
• Axle Spacer Kit for I.R.S., 6 pcs.
• Cotter Pin, Rear Axle Nut (5 x 55mm), Type 1 50-79, Ghia 56-74, Type 2 50-79, Type 3 64-73, Each
• Rubber Stop, Rear Axle, Type 2 65-79, Each
• Rubber Stop, Rear Axle, Type 1 60-79, Ghia 60-74, Type 3 64-73, Each
• Swing Axle Bearing Housing, Pair (Boxed)
• EMPI Chromoly I.R.S. Race Axle Kits
• Hi-Performance Swing Axle, Long, 68 Type 1, 28-7/16", Each
• Replacement Spiral Locks for 934 Axles, 4pcs
• Replacement Circlips for Type 1 & 2 Axles, 4 pcs.
• Replacement Spiral Locks for 930 Axles, 4 pcs.
• EMPI Chromoly I.R.S. Race Axles
• 19-1/4", for Type 2 Trans./930 C.V. Joints/3 x 3 Arms, Pair
• 19-1/4", for Type 2 Trans./Type 1 & 2 Joints/3 x 3 Arms, Pair
• 18-3/4", for Type 1 Trans./Type 1 & 2 Joints/+5 3/4" Rear Sect., Pair
• 15-5/8", for Type 2 Trans./930 C.V. Joints/Type 1 Suspension, Pair
• 15-5/8", for Type 2 Trans./Type 1 & 2 Joints/Type 1 Suspension, Pair
• 16-1/4", for Type 1 Trans./Type 1 & 2 Joints/Type 1 Suspension, Pair
• C.V. Joint End Cap for 934, 128mm O.D. CV Joints
• C.V. Boot Flange for 934, 128mm O.D. CV Joints – Stamped Steel
• C.V. Joint End Cap
• High Speed Boot for 930 C.V. Joint
• Type 2 Flange Only for P/N: 86-9303-D (Bulk) 10.3mm Holes
• Type 2 Boot Only for P/N: 86-9303-D
• 100mm Off-Road Boot Kit w/ Flange, for Type 2 (Bus), C.V. Joint
• Flange Only, 934 Over the C.V. Boot for P/N: 86-9312-D (Bulk)
• Boot Only, 934 Over the C.V. Joint (128mm)
• 934 Type C.V. Joint Over the C.V. Boot Kit
• 934 Flange Only for P/N: 86-9309-D (Bulk)
• 934 Boot Only for P/N: 86-9309-D (Bulk)
• 934 Type Off-Road Boot Kit w/Flange
• Metal Flange for 930 Over the C.V. Boot
• Boot Only, fits over 930 Type C.V. Joint (108mm) and Flange (Bulk)
• 930 Type C.V. Joint Off-Road C.V. Boot. Use with P/N 86-9313 Flange.
• 930 Type C.V. Joint Off-Road C.V. Boot. Use with P/N 86-9302 Flange or P/N 86-9312 Billet Aluminum Flange.
• 934 Type C.V. Joint Off-Road Inner C.V. Boot, Each
• 934 Type C.V. Joint Dual-Boot Flange, Set.
• 934 Leather Off-Road Over-Boot
• Grease Flange, 934 - for 12mm / 7/16" Bolts.
• Grease Flange, 930 – for 10mm / 3/8" Bolts.
• Grease Flange, Bus – for 8mm Bolts.
• Torque Distribution T-2 Washer for 100mm Joint, Each
• Torque Distribution T-1 Washer for 90mm Joint, Each
• Torque Distribution 930 Washer for 108mm Joint, Each
• Axle Nuts
• Micro Stub Axle w/ Washer for 930 C.V. Joint, 3/8" - 24 Threads, Each
• Standard Size Stub Axle for Type 1, 8mm Threads, Each
• Conv. Stub Axle for Type 1 to Type 2 Joint, Short for 5-Lug Drum, 8mm Threads, Each
• Conv. Stub Axle for Type 1 to 930 C.V. Joint, 3/8" - 24 Threads, Each
• Conv. Stub Axle for Type 1 to Type 2 Joint, 8mm Threads, Each
• Poly Drive Flange Plug, Type 2, Pair
• Poly Drive Flange Plug, Type 1, Pair
• Plug, Final Drive, Type 2, 69-79, Each
• 091 Type 2 Trans to 930 Joint, 40 Splines, 45mm Nose, 3/8" - 24 Threads, Pair
• 002 Type 2 Trans to 930 Joint, 37 Splines, 42mm Nose, 3/8" - 24 Threads, Pair
• Type 1 Trans to 930 Joint, 33 Splines, 36mm Nose, 3/8"- 24 Threads, Pair
• Type 1 Trans. to Type 2 Joint, 33 Splines, 36mm Nose, M8 Threads, Pair
• C.V. Ball, 1" (Standard Size), for 934 Joints, 24 pcs.
• C.V. Ball, 7/8" (Standard Size - .875"), for 930 Joints, 24 pcs.
• C.V. Ball, .873" (.002" undersize), for 930 Joints, 24 pcs.
• Type 2 Cage Only (Repl. to fit 87-9917), Each
• Type 1 Cage Only (Repl. to fit 87-9916), Each
• Type 2 Chromoly C.V. Cage Only (Repl. to fit 98-5084-B), Each
• 934 H.P. Chromoly C.V. Cage for 1" Balls.
• 930 H.P. Chromoly C.V. Cage, for 7/8" (.875") Balls
• C.V. Ball, .874", for 930 Joints, 24 pcs.
• C.V. Ball, 5/8", for Type 1 Joints, 24 pcs
• 930 Race w/ Balls Kit, Each
• 934 Race Prep C.V. Race Only, (Repl. to fit 98-5098-B), Each
• 934 C.V. Race Only, (Repl. to fit 98-5096-B, 98-5097-B), Each
• Chromoly 930 Race Only, (Fits 87-9469-B), Each
• 930 Race Prep C.V. Race Only, (Repl. to fit 98-5094-B), Each
• 930 Race Prep C.V. Race Only, (Repl. to fit 87-9470-B), Each
• 930 C.V. Race Only, (Repl. to fit 87-9469-B), Each
• Type 2 Race Only, (Repl. to fit 98-5098-B), Each
• Type 2 Race Only, (Repl. to fit 87-9917), Each
• Type 1 Hardened C.V. Race, for 11/16" Balls, Each
• Type 1 Hardened C.V. Race, for 5/8" Balls, Each
• Type 1 Race Only, (Repl. to fit 87-9916), Each
• EMPI 35 lb. Drum of Grease
• EMPI Red C.V. Grease, 14oz tube
• EMPI Moly Grease for C.V. Joints
• Bolt for 934 C.V., 1/2" - 20 x 2-1/2", 12 Pt., External, Set of 6
• Bolt for 934 C.V., 7/16" - 20 x 2-7/16", 12 Pt., External, Set of 6
• Spindle Clamp Nut w/ screw, 18mmx1.0, Left, Type 2 68-79, Each
• Bolt for 930 C.V., 3/8" - 24 x 2-1/4", 12 Pt., External, Set of 6
• Bolt for Type 1 & 2 C.V., 3/8" - 24 x 1-3/4", 12 Pt., External, Set of 6
• Bolt for Type 1 & 2 C.V., 3/8" - 24 x 1-3/4", Allen Head, Set of 6
• Bulk Bolt for Type 1 C.V., M8 x 1 15/16", 12 Pt. Internal, Each
• Bolt for Type 1 C.V., M8 x 1-15/16", 12 Pt. Internal, Set of 6
• Deluxe C.V. Joint Boot Kit, Type 2 (w/ Bolts)
• C.V. Joint Boot Kit, Type 2
• Deluxe C.V. Joint Boot Kit, Type 1 (w/ Bolts)
• C.V. Joint Boot Kit, Type 1
• EMPI New Lobro 930 C.V. Joint
• EMPI H.P. Lightened 934 C.V. Joint w/ Chromoly Cage
• EMPI H.P. Lightened 930 C.V. Joint w/ Chromoly Cage
• EMPI, Porsche Off-Road 934 C.V. Joint Only
• EMPI, Porsche 934 C.V. Joint Only
• EMPI, Porsche Off-Road 930 C.V. Joint Only
• 930 Type C.V. Joint Off-Road Boot Kit w/ Flange
• 930 Billet Aluminum Boot Retainer and C.V. Flange, Set
• Bolt for 930 C.V., 3/8" - 24 x 2-5/16", 12 Pt., External, Set of 6
• 930 Flange Only for Part#: 86-9300-D (Bulk)
• 930 Boot Only for Part#: 86-9300-D (Bulk)
• EMPI, Porsche 930 C.V. Joint Kit
• EMPI, Porsche 930 C.V. Joint Only
• C.V. Joint Only, Type 2 & Vanagon, 100mm O.D., .750" Balls, Each
• C.V. Joint Kit, Type 2 & Vanagon, 100mm, Each
• C.V. Joint Only, Type 1 & 3, Vanagon Synchro (Front Inner) 90mm O.D., 6875" Balls, Each
• C.V. Joint Kit, Type 1 & 3, Vanagon Synchro (Front Inner) 90mm, Each
• Type 3, A/T, w/ I.R.S., Right, 69-73, (17-1/4")
• Type 3, A/T, w/ I.R.S., Left, 69-73, (15-5/16")
• Vanagon, A/T, Right, 83-92, (22-5/16")
• Vanagon, A/T, Left, 83-92, (20-1/2")
• Vanagon, M/T, 83-92, (21-1/4")
• Vanagon, A/T, Right, 80-82, (22-11/16")
• Vanagon, A/T, Left, 80-82, (21")
• Vanagon, M/T, 80-82, (21-1/2")
• Type 2, A/T, w/I.R.S., Right, 68-79, (19-7/8")
• Type 2, A/T, w/ I.R.S., Left, 68-79, (18")
• Type 2, M/T, w/ I.R.S., 68-79, (18-3/4")
• Thing, w/ I.R.S., 73-74, (16-1/8")
• Type 1 & Ghia, w/ I.R.S., 68-79, (16-3/8")
• Stock Style Solid Axle Boot Only, Bulk, Each
• Strut Insert Rubber Stop, Fits 1973-1979 Super Beetle
• Strut Rubber Stop
• Upper Strut Mount
• EMPI Stock Design Shock Absorber, Ball Joint, Stock Height
• Seal, Trailing Arm, Upper, Type 1 66-77, Ghia 66-74, Each
• Seal, Trailing Arm, Lower, Type 1 66-77, Ghia 66-74, Each
• Seal, Trailing Arm, Upper/Lower, Type 1 50-65, Ghia 56-65, Each
• Control Arm Bushing
• Rear Trailing Arm Bushing, Each
• Steering Damper, Type 3 62-73
• Steering Damper, Super Beetle, 71-79
• Eccentric Washers, Pair
• Lower Ball Joint, Left or Right, Thing 1973-1974 (Type 181)
• Upper Ball Joint, Left or Right, Thing 1973-1974 (Type 181)
• Lower Ball Joint, Type 3, Each
• Ball Joint, Super Beetle 73½-79, Each
• Drag Link, Adjustable, Type 2, 68-79
• Drag Link, Adjustable, Type 2, 55-67
• Left Tie Rod, Adjustable, Type 2, 55-67, Each
• Right Tie Rod, Type 2, 55-67, Each
• Right Tie Rod, Type 2, 68-79, Each
• Center Tie Rod w/ Ends, Super Beetle, 71-74, Each
• Left & Right Tie Rod, Adjustable, S/B 75-79, Each
• Right Tie Rod, Adjustable, Type 1, 66-5/68, Each
• Left Tie Rod, Adjustable, Type 1, 66-5/68, Each
• Steering Shaft w/ Joints, Super Beetle, 75-79
• Left Outer Tie Rod End, Type 1/3, thru 5/68, Type 2 55-67
• Urethane Smooth/Round Bushings - 2" / 2 1/8" Tapered I.D. (Black), Type 2 Only, Pair
• Urethane Smooth/Round Bushings - 2" I.D., Small O.D., Pair
• Urethane Smooth/Round Bushings - 1-7/8" I.D., Small O.D., Pair
• Rubber Stop, Suspension Travel, Type 1 50-65, Ghia 56-65, Each
• Swing Lever Rebuild Kit. Type 2 55-67
• Clevis Pin, Clutch Cable, Type 2 72-79, Each
• Clevis Pin, Clutch Cable, Type 2 55-71, Each
• Shift Lever, Transmission, Type 1 61-79, Chia 61-74, Each
• Clutch Cable Arm, Type 1 74-79, Each
• Clutch Cable Arm, Type 1 72-74, Each
• Longer Replacement Clutch Cable Arm, Type 1 61-71 and all 002 Type 2 Transmission, Each
• Transmission Gasket Set, Type 2, 68-75
• Boot, Nose Cone to Chassis
• Nose Cone Bushing, Rear, Late
• Nose Cone Seal Holder for Type 1 & Type 2 61-66
• Nose Cone Seal Holder for Type 1 & Type 2 67-68
• Oil Seal, Transmission, Type 1 69-79, Each
• Nose Cone Bushing, Front, Late
• Nose Cone Bushing, Front or Rear, Early
• Synchro Ring, 3rd/4thGear
• Synchro Ring, 1st/2nd Gear
• Replacement Clip Only, Each
• Seal, Final Drive (Drive Flange)
• Seal, Final Drive, Fits Type 2 68-75
• Seal to Fit Side Cover, Type 1, 69-79 (Elring)
• Spring, Clutch Operating Lever, Type 1 74-79, Each
• Spring, Clutch Operating Lever, Type 1 71-74, Each
• Spring, Clutch Operating Lever, Type 1 61-71, Each
• Chrome Zoom Tube
• Cheese Grater Exhaust Tips
• Stainless Steel Vintage Exhaust Tips
• Chrome Baffled Exhaust Tips
• Stainless Steel Exhaust Tips
• Chrome Tapered/Baffled Tips, Pair
• EMPI Braided Battery Straps
• EMPI 34 PICT Carburetor Spacer
• EMPI Carburetor Adapter Kit w/ Stds, Nuts, & Gaskets
• EMPI Cable Holder
• EMPI Wire Separators
• EMPI Taylor Spiro Pro "409" Race Wire Sets
• EMPI 90° Megavolt Ignition Wire Sets
• EMPI 90° Suppressed Ignition Wires
• EMPI Stock Ignition Wire Set
• EMPI Ignition Wire Set, Copper Core
• External Ballast Resistor, 1.35 Ohms
• Urethane Mount Kit w/ Hardware, 3-Piece Kit
• EMPI EPC 48/51 Float Only
• EMPI Banjo Fitting w/ Press In 1/4' Barb
• EMPI EPC 48/51 Auxiliary Venturi, 48mm
• EMPI EPC 48/51 Air Fuel Mixture Screw and Spring
• EMPI EPC 48/51 Fast Idle Screw and Spring
• EMPI EPC 48/51 Stack Hold Down Tab
• EMPI EPC 48/51 8.0 Needle and Seat
• EMPI EPC 51
• EMPI EPC 48
• EMPI Billet Distributor Clamp w/ Ignition Timing Marks
• EMPI Billet Combo Fuel Pump Block-Off/Coil Mount
• EMPI Billet Aluminum Distributor Hold Down Clamp
• Rectangular Bulk Replacement Clip 1-3/4"
• Rectangular Bulk Replacement Clip 2-1/2"
• Rectangular Replacement Clips 1-3/4", Pack of 6
• Rectangular Replacement Clips 2-1/2", Pack of 6
• Rectangular Gauze Replacement Element, 6-3/4" x 4-1/2" x 1-1/2"
• Rectangular Gauze Replacement Element, 6-3/4" x 4-1/2" x 1-3/4"
• Rectangular Gauze Replacement Element, 6-3/4" x 4-1/2" x 2-1/2"
• Rectangular Air Cleaner Stock VW Carb, Clamp-on, 2" High w/Gauze, Includes Clamp Replacement Element
• Rectangular Air Cleaner WEBER DFV, DFAV, DFEV, 2-1/2" High w/ Gauze
• Rectangular Air Cleaner WEBER DFV, DFAV, DFEV, 1-3/4" High w/ Gauze
• Rectangular Air Cleaner WEBER DGV, DGAV, DGEV, 2-1/2" High w/ Gauze
• Rectangular Air Cleaner WEBER DGV, DGAV, DGEV, 1-3/4" High w/ Gauze
• Rectangular Air Cleaner EMPI HPMX/WEBER IDF/EMPI "D" Series 1-5/8" High w/ Gauze (Type 3 Application)
• Rectangular Air Cleaner EMPI HPMX/WEBER IDF/EMPI "D" Series 2-1/2" High w/ Gauze
• Rectangular Air Cleaner EMPI HPMX/WEBER IDF/EMPI "D" Series 1-3/4" High w/ Gauze
• Oval Gauze Replacement Element, 7" x 4-1/2" x 1-3/4"
• Chrome Air Cleaner WEBER 38-45 DCOE & Dellorto DHLA, 3-1/2" High w/ Gauze (1-Hole Top)
• Chrome Air Cleaner WEBER 38-45 DCOE & Dellorto DHLA, 1-3/4" High w/Gauze (2-Hole Top)
• Chrome Air Cleaner EMPI HPMX/WEBER IDF/EMPI "D" Series 3-1/2" High w/ Gauze (1-Hole Top)
• Oval Gauze Replacement Element, 7" x 4-1/2" x 3-1/2"
• Billet HPMX/IDF/"D" Series Air Cleaner with 6.0-inch Element
• Billet HPMX/IDF/"D" Series Air Cleaner with 3.5-inch Element
• EMPI Die-Cast Oval Air Cleaner, 7-1/4" x 4-1/2" x 3-3/8"
• Oval Replacement Element. 3-1/4" High
• Oval Air Cleaner, 9" x 5-1/4" x 4-1/8" High (Fits under decklid on Type 1)
• Oval Air Cleaner, 9" x 5-1/2" x 6-3/4" High (Will not fit on VW sedans)
• Oval Replacement Element, 6" High
• Oval Replacement Element, 6" High
• Oval Air Cleaner, 9" x 5-1/2" x 6-1/8" High
• EMPI 38EGAS Single Carburetor Kit, Type 3
• Caliper Pads, Replacements for Wide 5 Conversion Kits
• EMPI Dual EPC-51, Type 1 with Race Manifolds (Kit supplied with 43-5242 Hex Bar Linkage)
• EMPI Dual EPC-48, Type 1, with Standard Manifolds (Kit supplied with 43-5240 Linkage)
• EMPI Dual EPC-48, Type 1, with Standard Manifolds (Kit supplied with 43-5242 Hex Bar Linkage)
• EMPI Dual EPC34 Kit, Type 3, Dual Port with Air Cleaners
• EMPI Dual EPC34 Kit, Type 3, Single Port with Air Cleaners
• EMPI Dual Kit, Type 3 with Short Air Cleaners
• EMPI Dual-D Deluxe Carburetor Kit, Type 4
• EMPI Dual-D Deluxe Carburetor Kit, Type 3
• EMPI Dual-D Deluxe Carburetor Kit, Type 1
• Mahle Piston & Cylinder Kit, 94mm x 69mm Stroke, Forged
• Mahle Piston & Cylinder Kit, 92mm x 69mm Stroke, Forged
• Mahle Piston & Cylinder Kit, 90.5mm x 69mm Stroke, Forged
• Mahle Piston & Cylinder Kit, 87mm x 69mm Stroke, Forged
• Mahle Piston & Cylinder Kit, 85.5mm x 69mm Stroke, Forged
• Mahle Piston & Cylinder Kit, 87mm x 69mm Stroke
• Porsche Custom Early 911 Flywheel
• AMC 2.0L Porsche 914/912E Aircooled Cylinder Head, 3 Stud
• Type 1 36HP Oil Strainer
• Type 1 Oil Screen, Small Hole (Early)
• Add Match-Ported AA Type 4 Manifolds (Stage 2)
• Add Match-Ported AA Type 4 Manifolds (Stage 1)
• Add Match-Ported AA Type 1 Offset Manifolds (Stage 2)
• Add Match-Ported AA Type 1 Offset Manifolds (Stage 1)
• EMPI Dual 34 EPC Carb Kit w/ Air Cleaners, VW Type 1 Single Port
• AA Spin-On Oil Filter Pump 8mm Stud, 30mm Gears, "Flat" Cam
• Replacement Cup Adjuster for Rocker Arm Assemblies (Each)
• Standard Generator/Alternator Stand "Chrome" for 12 Volt with Billet Oil Filler
• Standard Generator/Alternator Stand for 12 Volt with Billet Oil Filler
• Hasting 105mm Type 4/914 Ring Set 1/16 x 1/16 x 3/16
• Brosol Fuel Pump, Alternator Type
• T-Bars, Pair
• Chrome Oval Air Cleaner 40-44 IDF, 4-1/2" X 7" X 6"
• Replacement O-Ring Seal for Bolt on Covers
• Chrome Crank Pulley Long Bolt Nut & Washer
• Type 1 Flywheel Seal 1100-1200cc, 36HP Volkswagen
• Gas Cap (Locking) for T1, T2, T3, & Ghia
• Set of AMC Type 4 Porsche 914 Heads 48 x 38 Valves, Square Port, Dual High-Rev Stage 1 P&P
• Set of AMC Type 4 Porsche 914 Heads 48 by 38 Valves, Square Port, Dual High-Rev, Stage 2 P&P
• Set of AA Type 4 Heads 48 x 38 Valves, Square Port, Dual High-Rev Stage 1 P&P
• Set of AA Type 4 Heads 48 by 38 Valves, Square Port, Dual High-Rev, Stage 2 P&P
• Set of AMC VW Type 4 Porsche 914 Performance Cylinder Heads, 44X36, Square Port
• Set of AA VW Type 4 Performance Cylinder Heads, 44X36, Square Port
• Set of AMC VW Type 4 Porsche 914 Performance Cylinder Heads, 42X36, Square Port
• Set of AA VW Type 4 Performance Cylinder Heads, 42X36, Square Port
• Set of AA Porsche 914 2.0L Heads 48 by 38 Valves, Dual High-Rev, Stage 2 P&P
• Set of Porsche 914 2.0L AA Performance Cylinder Heads, 48x38 Stage 1 P&P
• Set of Porsche 914 2.0L AA Performance Cylinder Heads, 44X36
• Web Cam Bolts and Washers Kit for Type 4/912/914
• AA 2.0L Porsche 914/912E Aircooled Cylinder Head, 3 Stud
• Set of AA 2.0L Type 4 Aircooled Cylinder Heads "Square Port"
• Set of AA 2.0L Type 4 Aircooled Cylinder Head "Round Port"
• AA Bare 2.0 Head Casting, Type 4 Aircooled "Square" Port
• AA Bare 2.0 Head Casting, Type 4 Aircooled "Round" Port
• Stainless Steel Valve, 8mm Stim for Type 4, 914,912E
• 36mm Exhaust Valve, 9mm Stim, Porsche 914/912E
• 34mm Exhaust Valve, Type 4
• 33mm Exhaust Valve, Type 4
• 42mm Intake Valve, 2.0L Porsche 914/912E
• 37.5mm Intake Valve, 2.0L Type 4
• 41mm Intake Valve, 1.8L Type 4
• Type 4, 914 Performance Chromoly Valve Retainer (Set of 8)
• 39.3mm Intake Valve, 1.7L Type 4
• Engine Hardware Kit for VW, 159pcs
• Empi Heater Box J-Tubes, 1 1/2 Dia, Black for Type-1 & Type-2
• VW Ball Foot Swivel Valve Adjusters, Set of 8
• Grant 80mm Piston Ring Set 2.5 x 2.5 x 4.0
• Throttle Cable Bracket for Type 4
• Coil Relocation Bracket for Type 1, Type 2
• Mahle Piston & Cylinder Kit, 85.5mm, 1500-1600cc VW Bug Type 1
• Shims for EMPI Billet Alternator / Generator Pulley
• Special Nut and Washer Set for EMPI Billet Alternator / Generator Pulley
• EMPI Billet Alternator / Generator Pulley
• Billet Aluminum 12-Volt Alt/Gen Pulley, Polished Outer Half W/Metal Inner
• Billet Aluminum 12-Volt Alt/Gen Pulley (Outer Half Only)
• VW Chrome Hub Cap 46-65 With No Logo
• VW Chrome Hub Cap 68-79 With Logo
• Adjustable Timing Pointer
• Replacement Belt for EMPI Serpentine Belt Pulley System
• Replacement Bearings (Pair) for EMPI Serpentine Belt Pulley System
• EMPI Serpentine Belt Pulley System
• Rocker Shaft Shims for 1.25 or 1.4 Rocker Arms (Set of 8)
• Crankshaft Pulley Woodruff Key "Small" for Type 1
• Timing Gear Woodruff Key "Large" for Type 1
• Brass Crankshaft "Distributor Drive" Gear for Type 1
• Crankshaft Gear Snap Ring for Type 1
• Stock Crankshaft Gear Spacer for Type 1
• VW Type 1 Crankshaft Gear Racing Spacer
• Tri Mil Muffler, Fits Sidewinder Street Header, Raw Steel Finish
• Chrome 36HP Dog House Tin Kit With Ducts With Preheat
• Chrome 36HP Dog House Tin Kit With Ducts W/O Preheat
• Chrome 36HP Dog House Tin Kit W/O Ducts W/O Preheat
• Black 36HP Dog House Tin Kit W/O Ducts With Preheat
• Black 36HP Dog House Tin Kit W/O Ducts W/O Preheat
• Black 36HP Dog House Tin Kit With Ducts With Preheat
• Black 36HP Dog House Tin Kit With Ducts W/O Preheat
• AA Flat Steel Oil Pump Cover
• Flywheel End Play Shim Kit
• Distributor Drive Pinion Spring
• Distributor Drive Pinion Gear, 1200-1600cc Type 1, 2 & 3
• AA Complete Clutch Kit 200mm Type 1, 2, & 3 Late 71 to 79
• AA Complete Clutch Kit 200mm Type 1, 2, & 3 Early 67 to 70
• AA Clutch Release Bearing VW Through 1970
• VW, Late 68-UP Headlight Stone Guard, Stainless Steel
• AA Performance Clutch Kit, 200mm Type 1, 2, & 3 Late 71 to 79
• AA Performance Clutch Kit, 200mm Type 1, 2, & 3 Early 67 to 70
• AA Throwout Bearing Late Type 1 / Type 4 / Waterboxer
• Dashboard Grab Handle, Grey w/ Chrome Mounts, Type-1
• Dashboard Grab Handle, Ivory w/ Chrome Mounts, Type-1
• Rear Quarter Window Upright Seal, Left or Right, for Beetle Convertible 54-79
• Cigarette Lighter Knob Cap, Type-1 68-79
• Alternator Cooling Elbow Pipe for 70A Alternators, Type 2 75-79
• Alternator Cooling Elbow Pipe for 55A Alternators, Type 2 72-79, Type 4 69-74
• Rear Light Bulb Holder for Type-2 72-79, Each
• Patriot Exhaust H4860-1 1-1/2" Classic Import Header Toyota HiLux Pickup 1975-84 2/4WD w/ 20R/22R Non-EFI Engines Metallic Ceramic Finish
• Patriot Exhaust H4860 1-1/2" Classic Import Header Toyota HiLux Pickup 1975-84 2/4WD w/ 20R/22R Non-EFI Engines High Temp Black Finish
• Crank Upgrade:
• 8mm Valve Adjusting Screw & Nut Kit (Set of 8), Type 1, 2, & 3
• Caliper Pads, for E-Brake Caliper, Rear
• Wheel Stud, M14-1.5 to M12-1.5, Screw-in Style, For 4-Lug Drums/Rotors
• Metal Brake Line, Rear Right Side (Passenger Side) at the ‘T’, 635mm Long, fits ’49-’68 Bug, Ghia & Type 3
• Tri Mil Exhaust, Single Glass-Pak for Bug, Raw Steel Finish with Chrome Tip
• In-Car Valve Spring Removal Tool
• Schadek Oil Pump 8mm Stud "Flat" Cam For Full Flow Only
• IDF Emulsion Tube Holder
• AA Type 4 Bolt-on Aluminum Valve Cover Kit
• Hardened Valve Lash Caps (Set Of 8)
• AA Exhaust Head Flanges for 1 5/8" Pipe (Set of 4)
• AA Exhaust Flange for AA 1 1/2 & 1 5/8" Header
• 009 Distributor Rotor
• Porsche 2.0L 914, Head Kit-4 EXH Studs, 3 IN Studs, 4 Rocker Studs
• 1.9 / 2.1 Waterboxer Push Rod Tube (Set of 8)
• 1.9 / 2.1 Waterboxer Push Rod Tube
• VW 82.5MM Porsche 356/912 Cast Iron Cylinder Kit
• VW 83mm 40 Horse Power Piston & Cylinder Kit For late Model European
• Clutch Cable, 2333mm for T3 66-73
• Clutch Cable, 2333mm for T3 62-65
• Clutch Cable, 3215mm for T2 72-79
• Clutch Cable, 3168mm for T2 68-71
• Clutch Cable, 3110mm for T2 60-62
• Clutch Cable, 3116mm for T2 50-59, 62-67
• Clutch Cable, 2260mm for T1 & Ghia 62-71
• Clutch Cable, 2268mm for T1 46-60, 75-79 & Ghia 56-60
• Clutch Cable, 2281mm for T1 72-74, Ghia 72-74 & Thing 73-74
• Accelerator Cable, 2608mm for T1 75-79
• Accelerator Cable, 2630mm for T1 72-74, T2 66-73, Ghia 72-74 & Thing 73-74
• Accelerator Cable, 2630mm for T1 46-57 & Ghia 56-57
• Black Anodized Degree Wheel Pulley, With AA Logo
• Porsche 356 / 911 Spark Plug Wrench w/ 6 Point Wrench
• AA 009 Distributor Centrifugal Advance
• Crankshaft Timing Gear for Type-1
• Chrome Distributor Clamp
• Chrome Mesh Gen/Alt Pulley Guard
• Chrome Generator/Alternator Pulley Nut and Hub
• Chrome Generator/Alternator Pulley
• 2 1/2" Dropped Spindles Link Pin Drum Brakes Pair for VW Type 1
• 2 1/2" Dropped Spindles Ball Joint Drum Brakes Pair for VW Type 1
• Black Rear Tin: NO Air, with Pre Heat
• Black 36HP Fan Shroud W/O Ducts
• 356/912 Push Rod Tube
• Oil Strainer Porsche 356/912
• Filler to Tank Fuel Hose for Type-2 68-71
• Gearbox Front Mount for T2 72-79
• Transmission Support (Cradle Mount) for T1, T2, T3, Ghia & Thing
• Automatic Transmission Mount for Vanagon 80-85
• Transmission Bus Mount for T2 72-79
• Engine Support Mount, Left & Right for T2 72-79
• Transmission Mount for Rear Support Bar, Left & Right for T2 68-71
• Front Transmission Mount, 8mm Stud for T2 60-62
• Front Transmission Mount for T1 & Ghia
• Rear Transmission Mount, Right for T1 & Ghia 73-79
• Rear Transmission Mount, Left for T1 & Ghia
• Transmission Mount Bracket for T1 66-72
• Front Transmission Mount for T1 66-72, T3, Ghia & Thing
• Front Transmission Mount Centering Sleeve for T1, T3 & Ghia
• Front Transmission Mount for T1 , T3 & Ghia 62-65
• Stock Style Rear Transmission Mount (2 per car) for T1, T2, T3, Ghia & Thing
• EGR Gasket for T1 75-79
• EGR Filter for Van 81-83
• EGR Filter Tube for T1 75-79
• EGR Filter for T2 75-78
• EGR Filter for T1 75-79
• Heater Channel Screw Plug for T2 68-72
• Lever Set, 2 Red 2 Blue for T2 74-79
• Fresh Air Lever, Blue for T2 74-79
• Heater Channel Vent Cover, Left for T1 68-79
• Heater Cable Grommit for T1 48-78
• Heater Control Knob for T1, T3 & Ghia
• Heater Control Knob, Ivory for T1, T2, T3 & Ghia
• Heater Control Black Knob for T1, T2, T3 & Ghia
• Heater Cable for Van 83-85
• Front Foot Well Vent Cable for T1
• Heater Cable for T1 '75-79 & Thing '73-74
• Heater Cable w/ Fan for T1, T3, Ghia & Thing
• Heater Cable for Thing 73-74
• Heater Cable w/o Fan for T1 & Ghia 65-74
• Heater Cable, Rear Foot Well for T1, T3 & Ghia
• Heater Cable, Rear Foot Well for T1 & Ghia 65-72
• Heater Cable, Right Side, 4225mm for T2 73-79
• Heater Cable, Right Side, 4235mm for T2 72
• Heater Cable, Right Side, 4320mm for T2 68-71
• Heater Cable, Left Side, 4100mm for T2 73-79
• Heater Cable, Left Side, 4100mm for T2 72
• Heater Cable, 5715mm for T2
• Heater Cable for T1 & Ghia '63-64
• Heater Cable for T1 & Ghia '56-63
• Heater Hose to Body Sleeve/Seal for T1
• Heater to Body Hose 60/60mm x 420 for T1, Ghia & Thing
• Heater to Body Hose 60/60mm x 365 for T1, T2 & Ghia
• Heater to Body Hose 60/63mm x 365 for T1
• Heater to Body Hose 50/50mm x 355 for T1 w/ Orig Htr Boxes
• Heater to Body Hose 60/50mm x 365 for T1
• Heater Cable Clamp Kit for T1, T2, T3, Ghia & Thing
• Heater Box Repair Pipe for T1, T2, Ghia & Thing
• Heater Box Repair Pipe for T1, T2 & Ghia
• Heater Box Lever Kit (Right) for T1, T2, Ghia & Thing
• Heater Box Lever Kit (Left) for T1, T2, Ghia & Thing
• Heater Control Box (Right) for T1 & T2
• Heater Control Box (Left) for T1 & T2
• Heater Box (Right) for T2 79 Fed
• Heater Box (Left) for T2 79 Fed
• Heater Box (Right) for T2 75-78
• Heater Box (Left) for T2 75-78
• Heater Box (Right) for T2 72-74
• Heater Box (Left) for T2 72-74
• Heater Box (Right) for T1 75-79
• Heater Box (Left) for T1 75-79
• Heater Box (Left), Sport Type 1.5" for T1, T2, Ghia & Thing
• Heater Box (Right), Sport Type 1.5" for T1, T2, Ghia & Thing
• Stock Heater Box (Right) for T1, T2, Ghia & Thing
• Stock Heater Box (Left) for T1, T2, Ghia & Thing
• Preheat Hose (Paper), 1.25"x17" for T3 62-67
• Preheat Hose (Paper), 25mmX570 for T1, T2, T3 & Ghia
• Fresh Air Hose, Right w/ Oval End for T2 72-74
• Fresh Air Hose, Paper 50mmX1080 for T1, T2, Ghia & Thing
• Fresh Air Hose, Alum. 50mmX1080 for T1, T2, Ghia & Thing
• Tail Pipe Gasket for T2 72-79
• Exhaust Manifold #2 & #3 Gasket for T2 1979 & Van 80-83
• Exhaust Manifold #1 & #4 Gasket for T2 1979 & Van 80-83
• Head Exchanger Gasket for T2 74-78
• Head Exchanger Gasket for T2 72-74
• Muffler to Head Gasket for T2 72-74
• Dual Pre-heat Gasket CA. for T1 1974
• Pre-heater w/ Small Hole Gasket for T1 72-73
• Tail Pipe Gasket for Van 83-91
• Exhaust Gasket for Van 83-91 (needs 6 per Vehicle)
• Exhaust Elbow for Van 86-91
• Exhaust Connecting Pipe for Van 86-91
• Exhaust Connecting Pipe for Van 83-85
• Header Pipe #2 & #4 for Syncro
• Header Pipe #2 & #4 for Van 86-91
• Header Pipe #2 & #4 for Van 83-85
• Header Pipe #1 & #3 for Syncro
• Header Pipe #1 & #3 for Van 86-91
• Header Pipe #1 & #3 for Van 83-85
• Stock Pre-heat Gasket
• Gasket for Muffler to Head for T1, T2, T3, Ghia & Thing
• Stock Muffler Pipe VW Thing (Right)
• Stock Muffler Pipe VW Thing (Left)
• Stock Muffler for VW Thing 1973 (Right)
• Stock Muffler for VW Thing 1973 (Left)
• Catalytic Converter Seal Ring for Van 86-91
• Stock Catalytic Converter for Van 83-91
• Gasket for Catalytic Converter for Van 83-91
• Stock Muffler Triangle Gasket for T2 75-79
• Stock Muffler Elbow for T2 75-79
• Muffler to Elbow Pipe for T2 75-79
• Stock Muffler Strap for Van 83-85
• Stock Muffler Tip for Van 83-85
• Stock Muffler Tip for Van 80-83
• Stock Muffler for Van 86-91
• Stock Muffler for Van 83-85
• Stock Muffler for T2 75-79
• Stock Muffler Bracket for T2 63-71
• Damper Pipe for Stock Muffler for T2 63-71
• Stock MufflerTip Install Kit for T2 72-79
• Stock Muffler Tip for T2 72-79
• Stock Muffler Tip for T2 63-71
• Stock Muffler Install Kit for T2 72-74
• Stock Muffler Install Kit for T2 63-71
• Stock Muffler for T2 72-74 (Type-4 Engine)
• Stock Muffler for T2 63-71
• Muffer to Head Gasket
• Muffler Tip Clamp for T2 60-62
• Muffler Tip for T1 75-79
• Muffler Tip Clamp for T1 75-79
• Muffler Install Kit for T1 71-79 Federal
• Stock Muffler for T1 75-79 California
• Stock Muffler for T1 75-79 Federal
• Fresh Air Hose Sleeve for T1 Late Model
• Clamp to Heater Box for T1 & Ghia '66-71
• Tail Pipe Clamp for T1 & Ghia '55-60 (36 hp)
• Tail Pipe Clamp for T1 & T2
• Exhaust Install Kit for 1600
• Exhaust Install Kit for 40hp
• Exhaust Install Kit for 36hp
• Exhaust Tip for T1 74 California
• Exhaust Tip for T1 (Late Model)
• Exhaust Tip for T1 & Ghia
• Screw Kit for Fuel Sender Seal for T1
• Sending Unit for Fuel Tank, 6.75" for T3
• Sending Unit for Fuel Tank for Vanagon
• Sending Unit for Fuel Tank for T2
• Sending Unit for Fuel Tank, 8.25" for T2
• Sending Unit for Fuel Tank, 7.5" for T2 & Ghia
• Sending Unit (Mechanical) for Fuel Tank for T1 & Ghia
• Sending Unit for Fuel Tank, 11" for T1 & Ghia
• Gas Cap Seal, 70mm for T1, T2, T3, Ghia & Thing
• Gas Cap Seal, 80mm for T1 & Ghia
• Gas Cap Seal, 100mm for T1
• Gas Cap (Locking) for Type-1, Type-3 & Ghia
• Gas Cap (Locking) for T2
• Gas Cap (Non-Locking) for T1, T2, T3, & Ghia
• Gas Cap (Locking) for T1, T2, T3, Ghia & Thing
• Gas Cap for T1, T2, T3, Ghia & Thing
• Gas Cap for T1 & Ghia
• Gas Cap, 100mm for T1 & T2
• Fuel Transfer Tube Grommit for Vanagon
• Filter Neck to T Fitting Hose for Type-1 & Thing
• Filter Neck to Breather Hose for Type-3
• Filter Screen in Gas Tank for T1, T2, T3, Ghia & Thing
• Fuel Tap for Type-1 & Type-2
• Fuel Tap for Type-1, Type-3 & Ghia
• Filler Neck Shield for Van
• Fuel Neck Seal for Thing
• Fuel Filler Hose for T1, T3 & Ghia
• Gas Filler Neck Collar for Type-2
• Gas Tank T for Type-2
• Fuel Tank Mount (Tab) for T1, T3, Ghia & Thing
• Fuel Tank to Body Seal for Type-2
• Fuel Tank to Body Seal for Type-1
• Oil Breather to Air Filter Hose for Vanagon
• Intake Manifold Sleeve for T3
• Intake Manifold Sleeve for T2 & Vanagon
• Intake Manifold Sleeve for T1
• Fuel Filter for Van
• Fuel Filter 8-8mm for T3
• Fuel Filter 6-8mm for T1 & T2
• Universal Fuel Filter
• Intake Manifold Block for T3
• Intake Manifold Gasket (Metal) for T1, T2, Ghia & Thing
• Intake Sealing Washer 32x38 for T1, T2 & Ghia
• Intake Manifold Block for T1
• Intake Manifold Block for T2
• Intake Manifold Gasket (Metal) for T2
• Air Cleaner Elbow for T2
• Auxiliary Air Regulator Elbow for T2
• Elbow, Balance Pipe for T2
• Elbow, Balance Pipe OEM for T2
• Oil Breather Hose for T2
• Air Cleaner Hose for T1
• Clutch Slave Cylinder Rebuild Kit for Van 80-91
• Clutch Master Cylinder for Van 80-91
• Clutch Slave Cylinder for Van 80-91
• Clutch Cable Lever Arm for Clutch Operating Shaft
• Clutch Return Spring for T1 72-74, T3 72-73 & Ghia 72-74
• Clutch Return Spring for T1 61-71, T2 61-75, T3 62-72 & Ghia 61-72
• Operating Shaft Bushing Kit, T1 61-70, T2 61-70, T3 62-70 & Ghia 61-70
• Operating Shaft Bushing (Right), T1 72-79, T2 76-79, T3 72-73 & Van 80-83
• Operating Shaft Bushing (Left), T1 72-79, T2 76-79, T3 72-73 & Van 80-83
• Operating Shaft Bushing (Left), T1 66-71, T2 66-75, T3 66-72 & Ghia 66-72
• Operating Shaft for Release Bearing for T2 76-79 & Van 80-91
• Operating Shaft for Release Bearing for T2 71-75
• Operating Shaft for Release Bearing for T2 68-70
• Operating Shaft for Release Bearing for T1 72-79, T2 72-73 & Ghia 72-74
• Operating Shaft for Release Bearing for T1, T2 & Ghia 71-72
• Operating Shaft for Release Bearing for T1 61-70, T2 61-67, T3 62-70 & Ghia 61-70
• Release Bearing Guide Sleeve for T1 & T2 71-79, T3 71-73, Ghia 71-74, Thing 73-74 & Van 80-83
• Clutch Kit, 228mm for Type-2, 76-79
• Clutch Kit, 210mm for Type-2, 72-74
• Sachs Clutch Disc 228mm Type 2 (1976 to 1979)
• Sachs Clutch Disc 210mm Type 2 (1972 to 1974)
• Sachs Pressure Plate 228mm Type 2 (1976 to 1979)
• Sachs Pressure Plate 210mm Type 2 (1972 to 1974)
• Air Intake Boot for Vanagon 86-91
• Air Intake Boot for Vanagon 83-85
• Air Intake Boot for Vanagon 80-83
• Oil Breather Hose for T1
• Elbow Boot to Air Flow Meter for T1
• Pilot Jet G55 for T1 61-74 for T2 & Ghia
• Pilot Jet G50 for T1 61-74 for T2 & Ghia
• Pilot Jet G45 for T1 61-74 for T2 & Ghia
• Idle Cut-off Valve 12V G55 for T1, T2 & Ghia
• Idle Cut-off Valve for T1, T2 & Ghia
• Round Carburetor Bowl Float for T1, T2 & Ghia
• Rectangular Carburetor Bowl Float for T1, T2 & Ghia
• Injection Tube for Accelerator Pump for T1 & T2
• Carburetor Needle Valve for T1 & T2
• Throttle Return Spring for T1, T2, T3, Ghia & Thing
• Choke Cable for T1 & T2
• 12V Choke for T1, T2 & Ghia 67-70
• Adapter Kit 31 Pict to 34 Manifold for T1, T2 & Ghia
• Kadron Carburetor Rebuild Kit Ea. Solex
• Carburetor Rebuild Kit 32 PDSIT-2/3 for T3
• Carburetor Rebuild Kit L/R 34 PDSIT-3 for T2
• Gasket for Carburetor Base 34 Pict for T1, T2, Ghia & Thing
• Gasket for Carburetor Base 34 Pict
• Gasket for Carburetor Base 31 Pict for T1, T2 & Ghia
• Carburetor 31 Pict 3 w/ Adapter to 34 Brosol for T1, T2 & Ghia
• Carburetor 31 Pict 3 Brosol for T1, T2 & Ghia
• Carburetor 30 Pict 1 w/ Manual Choke for T1, T2 & Ghia
• Filter to Carburetor Intake Boot for T2
• Air Cleaner Hose to Carburetor for T2
• Air Filter for Vanagon
• Air Filter for Type-4
• Air Filter for Type-1
• Fuel Line to Pump Zinc metal T1 & Thing
• Gasket for Fuel Pump Flange to Pump for T1, T2, T3, Ghia & Thing
• Gasket for Fuel Pump Flange to Case for T1, T2, T3, Ghia & Thing
• T4 Push Rod Fuel Pump for T2
• Fuel Pump Flange for Type-4 for T2
• 36HP Fuel Pump Flange for T1, T2 & Ghia
• Electric Fuel Pump Universal Facet
• Electric Fuel Pump for T1, T2 & Van
• AA Fuel Pump, Alternator Type
• 40HP Fuel Pump Thread in Hard Line for T1 & T2
• Fan Shroud Conversion Kit To Use T-4 Oil Cooler
• Toyota 22R/22RE Hypereutectic Piston Set With Grant Ring Set
• Toyota 22R/22RE Grant Ring Set
• 98mm Porsche 911 3.0L Engine Aluminum Nikasil Cylinder Set
• VW Type 4, 228mm Forged Flywheel
• Bosch High Performance Coil (Silver) 6 Volt
• 95mm Porsche 911 3.0L Engine Aluminum Nikasil Cylinder Set
• 95mm, Porsche 911 JE Piston & Cylinder Kit 3.2L 10.5:1
• 95mm, Porsche 911 JE Piston & Cylinder Kit 3.2L 9.5:1
• 95mm, Porsche 911 JE Piston & Cylinder Kit 3.0L 10.5:1
• 95mm, Porsche 911 JE Piston & Cylinder Kit 3.0L 9.5:1
• 95mm, Porsche 911 JE Piston & Cylinder Kit 3.0L Turbo 7.0:1, Deluxe
• 95mm, Porsche 911 JE Piston & Cylinder Kit 3.0L Turbo 6.5:1, Deluxe
• 95mm, Porsche 911 JE Piston & Cylinder Kit 3.2L 10.5:1, Deluxe
• 95mm, Porsche 911 JE Piston & Cylinder Kit 3.2L 9.5:1, Deluxe
• 95mm, Porsche 911 JE Piston & Cylinder Kit 3.0L 10.5:1, Deluxe
• 95mm, Porsche 911 JE Piston & Cylinder Kit 3.0L 9.5:1, Deluxe
• Fuel Pump Rebuild Kit VW Type 1 and 2
• 36HP Fuel Pump Rebuild Kit
• Fuel Tank, Type-2 1973-79 with "Carburetor ONLY"
• Fuel Tank,1961-1967, Type-1 and Ghia
• Shuffle Pin Upgrade
• Stroker Clearance Upgrade
• Bore to 94 mm Upgrade
• Bore to 92 mm Upgrade
• Sand Seal Upgrade
• Tap for Full Flow Upgrade
• Thermostat, 65c
• Preheat Hose Grommet
• Fresh Air Heater Hose Grommet
• Air Guide Plate, Rear Right
• Air Guide Plate, Rear Left
• Heat Deflector, Front Lower Left
• Heat Deflector, Front Lower Right
• Chrome Single Port Head Tin (Pair)
• Porsche 914 / VW Type 4 1.7/1.8L Chromoly H-Beam Rod Set
• Type-4 Lower Dip Stick Tube Bellows
• Generator/Alternator Stand Oil Deflector
• Generator/Alternator Stand Gasket
• Type 4/914 Mahle Oil Filter
• Oil Cap Gasket
• Oil Filler Breather Nut
• Type 1 Oil Cooler Conversion Seal kit 8/10mm
• Type 3 Oil Cooler Seal Early 8/8mm
• Type 1 Oil Cooler Seal Early 8/8mm
• Waterbox Oil Cooler O-Ring
• Waterbox Oil Cooler 83-91
• Oil Cooler Seal, 10mm Late, Single
• Oil Cooler Seals, 10mm Late, Pack of 4
• Oil Strainer Gasket Set, T-2 72-79, Vanagon 80-83, 914 70-76
• Oil Strainer Gasket Set, Type 1, 2, & 3 40HP,1300, 1500, & 1600
• 8mm, Oil Pump Cover Gasket
• 6mm, Oil Pump Cover Gasket
• 8mm, Oil Pump Case Gasket
• 6mm, Oil Pump Case Gasket
• 8mm Oil Pump Red Seal Nut
• 10mm Valve Adjusting Nut Type 4, 914, & 2.1L WaterBox
• 9mm Valve Adjusting Screw 1.9L WaterBox
• 10mm Valve Adjusting Screw Type 4, 914, & 2.1L WaterBox
• 5 Lug Rim Chrome Smoothie 5/205 4.5" Wide
• WaterBoxer Push Rod Tube Seal
• 1600 Push Rod Tube Seal
• 36HP Push Rod Tube Seal
• Mahle 1.9L Main Bearing Sets
• Kolbenschmidt 2.1L Main Bearing Thrust Washer
• Paper Gasket Flywheel Type-1 1600 CC
• Flywheel O-Ring Type-4 1.7, 1.8, & 2.0 L
• Type 1 O-Ring, Flywheel 1300-1600CC Volkswagen
• VW 1600 Flywheel End Play Shim .24mm/.010"
• Gland Nut Lock Washer OE Style
• 36mm OE Style Gland Nut
• Ignition Timing Scale, Steel T4
• Washer for Crank Pulley 20.3x44x2
• Crankshaft Pulley Mex/BR
• Crankshaft Pulley 1200cc
• VW Connecting Rod Bushing T4
• VW Connecting Rod Bushing 1600 (Set of 4)
• VW Connecting Rod Bushing 40HP
• H-Beam/I-Beam Replacement Connecting Rod Bushing
• Bushing for Damper on Main Stud
• Starter Bolt 10x110mm
• Hex Bolt 10x70mm
• Starter Bolt (10x110mm)
• Type 3 Oil Filler Gasket or Type 1, 2 block off
• O-Ring for Case Studs
• Washer for Case Studs
• Fuel Tank, 1955-67 Type-2
• Porsche 911 1965-83 2.0/2.2/2.4/2.7/3.0L 1 1/2" Header
• Tri Mil Exhaust, Sidewinder, 1-5/8 Header with Stinger Collector, Raw Steel Finish
• Tri Mil Bobcat Spring & Gasket Set, 1-5/8in.
• Tri Mil Collector, Bobcat, 1-5/8 Dia Mid-Engine Stinger Only, Raw Steel
• Tri Mil Exhaust, Bobcat, 1-5/8 Mid-Engine Header with Stinger Collector, Raw Steel
• Tri Mil Collector, Bobcat, 1-5/8 Dia with Quiet-Pak, Raw Steel
• Tri Mil Collector, Bobcat, 1-5/8 Dia with 2in Dia U-Bend, Raw Steel
• Tri Mil Collector, Bobcat, 1-5/8 Dia with 2in Dia Stinger, Raw Steel
• Tri Mil Exhaust, Bobcat, 1-5/8 Standard Header with Quiet-Pac, Raw Steel
• Tri Mil Exhaust, Bobcat, 1-5/8 Standard Header with U-Bend Collector, Ceramic Coated
• Tri Mil Exhaust, Bobcat, 1-5/8 Standard Header with U-Bend Collector, Raw Steel
• Tri Mil Exhaust, Bobcat, 1-5/8 Standard Header with Stinger Collector, Raw Steel
• Tri Mil Exhaust for Thing, Euro 2-Tip, Heat Risers, Raw Steel Finish
• Tri Mil Exhaust for Thing, Euro 2-Tip, Heat Risers, Ceramic Coated
• Tri Mil Exhaust, Euro 2-Tip, Dropped Tip, w/o Heat Risers, Raw Steel Finish with Chrome Tips
• Tri Mil Exhaust, Euro 2-Tip, w/o Heat Risers, Unpainted
• Tri Mil Exhaust, Bobcat, 1-1/2 Standard Header with U-Bend Collector, Raw Steel
• Tri Mil Collector, Bobcat, 1-1/2 Dia with Quiet-Pak, Raw Steel
• Tri Mil Collector, Bobcat, 1-1/2 Dia with 2in Dia U-Bend, Raw Steel
• Tri Mil Collector, Bobcat, 1-1/2 Dia with 2in Dia Stinger, Raw Steel
• Tri Mil Exhaust, Bobcat, 1-1/2 Standard Header with Quiet-Pac, Raw Steel
• Tri Mil Exhaust, Bobcat, 1-1/2 Standard Header with Stinger Collector, Raw Steel Finish
• Tri Mil Stinger, Bobtail, 2in Dia, Raw Steel
• Tri Mil, Bobtail, Quiet-Pak Only, Raw Steel
• Tri Mil, Bobtail, Glass-Pak Only, Raw Steel
• Tri Mil Exhaust, Bobtail, 1-1/2 Heater Box Header with Stinger, Raw Steel
• Tri Mil Exhaust, Bobtail, 1-1/2 Heater Box Header with Quiet-Pac, Raw Steel
• Tri Mil Exhaust, Bobtail, 1-1/2 Heater Box Header with Glass-Pac, Raw Steel
• Tri Mil Exhaust, Bobtail, 1-1/2 Standard Header with Stinger, Raw Steel
• Tri-Mil Targa Four-Tip Exhaust System with Heat Risers, Raw Steel Finish with Chrome Tips
• Tri Mil, J-Tubes, 1-3/8 Dia, Type-3, Flanged, Raw
• Tri Mil J-Tubes, 1-3/8 Dia for Type-1 & Type-2, Flanged, Raw
• Tri Mil J-Tubes, 1-3/8 Dia for Type-1 & Type-2, Raw Steel Finish
• Tri Mil Exhaust, Street Sidewinder, Merged, Raw Steel Finish with Chrome Tip
• Tri Mil Muffler, Single Quiet-Pak, Fits Standard Header, Raw
• Tri Mil Muffler, Dual Quiet-Pak, Fits Standard Header, Raw
• Tri Mil Exhaust, Dual Quiet-Pak for Bus & Ghia, Raw
• Tri Mil Exhaust, Single Quiet-Pak Exhaust System with Heat Risers, Raw Steel Finish with Chrome Tip, fits ’68-’71 Bus & ’56-’74 Ghia
• Tri Mil, Single Quiet-Pak, Fits Standard Header for Bug, Ceramic Coated
• Tri Mil, Single Quiet-Pak, Fits Standard Header for Bug, Raw
• Tri Mil Header, 1-3/8 Standard, Fits 13/15/1600cc, Raw
• Tri Mil, Dual Quiet-Pak, Fits Standard Header for Bug, Raw
• Tri Mil Exhaust, Dual Quiet-Pak, Raw, Bug
• Tri Mil Exhaust, Single Quiet-Pak, Heat Risers, Raw Steel Finish with Chrome Tip
• Tri Mil Muffler, Single Glass-Pak, Fits Standard Header, Raw Steel Finish with Chrome Tips
• Tri Mil Exhaust, Bazookas with Flared Tips & Heat Risers, Raw Steel
• Tri Mil Exhaust, Bazookas with Round Tips & Heat Risers, Raw Steel
• Tri Mil Exhaust, Bazookas with Flared Tips, Raw Steel
• Tri Mil Exhaust, Bazookas with Round Tips, Raw Steel
• Intake Gasket: Dual Port w/o Pin Holes EA
• Dual Port End Castings, PAIR
• Red Silicone Intake Boot Kit with Clamps
• Porsche 911 Carrera 2002-07 Engine Oil Separator
• Porsche Boxster/Cayman 2003-08 Engine Oil Separator
• Porsche 911 Carrera 1999-01 Engine Oil Separator
• Porsche Boxster 1997-02 Engine Oil Separator
• HD Sand Seal Pulley Seal-For Cut Case
• Replacement Sand Seal for Collar seal
• HD Sand Seal With Collar for STD Case no machine work
• Polished Degree Wheel Pulley, No Holes
• Polished Degree Wheel Pulley Sand Seal W/Seal & Collar Blk
• Polished Degree Wheel Pulley, with Holes
• VW Type 1 Roof Rack Lock Set
• Roof Rack, Type 2 50-79
• GR-2 Type 1 Rear shock
• White Spoke Steel Wheel (4 Lug & 5 Lug)
• Chrome Spoke Steel Wheel (4 Lug & 5 Lug)
• Wheel Stud, M14-1.5 to M14-1.5 x 63.5mm, Screw-in Style, For 4-Lug Style Wheels
• Wheel Stud, M14-1.5 to M14-1.5 x 38mm, Screw-in Style, For 4-Lug Style Wheels
• Rear Brake Drum, Wide-5 Lug VW Pattern – 5 x 205mm
• Wheel Bearing Install Kit, Front Drum/Rotor, Inner and Outer, fits April ’68-’79 Bug, Ghia, Super Beetle, Thing & Type 3
• Wheel Bearing Install Kit, Front Drum/Rotor, Inner and Outer, fits ’66-June ’68 Bug & Ghia
• Wheel Bearing Install Kit, Front Drum, Inner and Outer, fits ’49-’65 Bug & Ghia
• Baja System, Chrome Stinger, w/Heater (Incl. Alum. Flex Hose)
• Empi Tip Exhaust System Type 1, 1300-1600 cc, 66-73 Black with Chrome Tips
• Hi Performance PLUS Piston Upgrade:
• Stock Light Flywheel Upgrade
• Econo Light Flywheel Upgrade-copy
• Stock Head Upgrade:-copy
• Stock Head Upgrade:
• VW Type 1 Econo Rebuild Engine Kit
• Metal Brake Line, Front Driver Side (Left Side), 302mm Long
• Metal Brake Line, Front, Left Side (Drivers Side), 254mm (10″ approx.)
• Metal Brake Line, Rear, Left or Right at Wheel Cylinder, 445mm (17-1/2″ approx.)
• Brake Rotor, Front, 4-Lug (VW Pattern – 4×130)
• Front Outer Wheel Bearing, Bug/Ghia 1966-79
• Front Inner Wheel Bearing, Bug, Ghia & Type 3 1969-79
• Front Inner Wheel Bearing, Bug, Ghia & Type 3 1966-68
• Wheel Bearing, Bug/Ghia ’49-’65, Front, Outer
• Wheel Bearing, Bug/Ghia ’49-’65, Front, Inner
• Billet Look Running Brd., Black Satin, Polished Edge, Vintage Style, Pr.
• Billet Look Running Brd., Fully Polished, Pr.
• Bulk Stainless Steel Smooth Running Brd. (Must buy Multiples of 5)
• Stainless Steel Running Boards, Smooth, Pair
• Bulk Stainless Steel Louvered Running Brd. (Must buy Multiples of 5)
• Stainless Steel Running Boards, Louvered, Pair
• H.D. Running Boards
• License Plate Frame, Chrome, Each
• Bulk License Bracket, Rear, Each
• License Bracket, Rear, Each
• Bulk License Bracket, Front, Each
• License Bracket, Front, Each
• Stainless Steel Bracket Only for Origin Plate (w/Hardware)
• "D" Origin Plate w/Bracket
• "EMPI" Origin Plate w/Bracket
• Over-rider Plug Kit, 4 pcs
• Over-rider Grommet, 55-67, Set of 4
• Bumper Grommet, 68-73 (Exc. 71-73 Super Front), Pair
• Bumper Grommet, thru 67, Pair
• Brackets,Type 1, 68-73, to Early Bumper, Rear, Pair
• Brackets,Type 1, 68-73, to Early Bumper, Front, Pair
• Bulk Bolt, Short, 68-73, 12 pcs. (Ref. P/N: 113 707 191C)
• Bulk Bolt, Short, 68-73, 100 pcs.
• Bolt, Short, 68-73, Set of 4
• Bulk Bolt, Long, 12 pcs.
• Bulk Bolt, Long, 100 pcs.
• Bolt, Long, thru 67, Set of 4
• Bracket, Rear, Black, 55-67, Pair (Bulk P/N: 111 707 335B/6B, Each)
• Bracket, Front Black, 55-67, Pair (Bulk P/N: 111 707 135A/6A, Each)
• Dust Boot, Speedometer Cable, Type 1 61-77, Ghia 56-74, Each
• Speedo. Cable, Type 2, thru 67
• Speedo. Cable, S/B, 71-74
• Speedo. Cable, Type 1, 66-74
• Speedo. Cable, Type 1, 58-65
• Emergency Brake Cable, Type 1, 73-on, Each
• Emergency Brake Cable, Type 1, 68-72, Each
• Emergency Brake Cable, Type 1, 65-67, Each
• Emergency Brake Cable, Type 1, 58-64, Each
• Heater Cable, Right, Type 2, 73-79
• Heater Cable, Right, Type 2, 1972
• Heater Cable, Type 2, 55-67
• Heater Cable, Rear Footwell, Type1, 73-79
• Skin-Packed 7mm Wing Nut for Clutch Adjustment, Each
• Bulk 7mm Wing Nut for Clutch Adjustment, Each
• Bowden Tube, Type 1, thru 79, Type 2, thru 67, Type 3
• Clutch Cable, Type 2, 72-79
• Clutch Cable, Type 1, 6/63-71
• Clutch Cable, Type 1, thru 60, 62-63
• Bowden Tube, Type 1, 56-79, Ghia 56-74
• Acc. Cable, Type 1, 66-71
• Acc. Cable, Type 1, 58-65
• Round Piece only for Throttle Cable Extending Kit (Set Screw), Each
• Throttle Cable Extending Kit, 2 pcs. (Fits on cable end or cable)
• Cable Shortening Kit, Emergency Brake Only
• Cable Shortening Kit, Clutch Only
• Complete Cable Shortening Kit, Includes P/N: 3168, 3169, & 3170
• Universal Throttle Cable Kit
• Stock Throttle Cable Tube
• Racing Throttle Cable 16’, 3mm O.D.
• Bulk H.D. Throttle Cable Only, 16' Long
• H.D. Throttle Cable Only, 16' Long (Skin Packed)
• H.D. Throttle Cable Only, 9' Long (Skin Packed)
• H.D. Throttle Cable Kit, w/ Roller Pedal
• H.D. Throttle Cable Kit
• Roller Pedal, Billet Aluminum Roller
• Roller Pedal, Neon Pink
• Roller Pedal, Black
• Pedal Pads Clutch / Brake, w/ EMPI Logo, Pair
• Pedal Pads Clutch / Brake, w/ EMPI Logo, Pair
• Pedal Pad, Accelerator, Each (Bulk P/N: 113 721 647A)
• Pedal Pads, Clutch/Brake, Pair (Bulk P/N: 311 721 173A, Each)
• Pedal Pad Kit, 3-Piece Set
• Pedal Cover, Accelerator, Each
• Pedal Covers, Brake, Clutch & Accel., 3-Piece Set
• Pedal Covers, Brake & Clutch, Pair
• Accelerator Repair Kit only, Type 1 58-66, Ghia 58-66 (Ref P/N: 113 798 078)
• Accelerator Repair Kit only, Type 1 67-79, Ghia 66-74, Type 3 64-73
• Accelerator Repair Kit w/Pedal (Bulk P/N: 113 798 507B)
• Return Spring, Brake Pedal, Type 2 55-67, Each (Ref. P/N: 211 721 163A)
• Clutch Pedal Shaft, Type 1, 72-79 (Original German Style) (Ref. P/N: 111 721 305B)
• Clutch Pedal Shaft, Type 1 65-71, Ghia 65-71, Type 3 65-71 (Ref. P/N: 113 721 305B)
• Brake Boot, Blk, T-2, 50-79, Each (Bulk P/N: 211 863 341B)
• Brake Boot, Grey, T-2, 50-79, Each (Bulk P/N: 211 863 341)
• Emergency Brake Boot, Neon Pink
• Emergency Brake Boot, Black, Type 1 65-on & S/B, Type 3 66-on (Bulk P/N: 311 711 461)
• Emergency Brake Boot, Black, Type 1 58 thru 64, Type 3 thru 65 (Bulk P/N: 311 863 341A)
• E-Brake Boot, Black, Type 1 55-57 (Bulk P/N: 111 863 341A)
• Billet Aluminum Parking Brake Cover
• C Clip, Parking Brake Lever Pin
• Anchor Pin, Parking Brake Lever (use w/211 609 619)
• Quick Shift Kit, Hi-Tech Plastic
• Quick Shift Kit, Cast Aluminum
• Shift Rod Bushing Rebuilding Kit (Skinpacked) (Incl. Bushing, Guide & Locking Ring)
• Shift Guide, Type 1, 60-79, Bulk
• Locking Ring for P/N: 98-2038 Bushing, Bulk
• Universal Gear Shifter Boot
• Shift Bushing Repair Kit, All Bushings Necessary, Type 2 54-79, Vanagon 80-93
• Shift Rod Bushing, Type 1, 60-79
• Replacement Reverse Lock-Out Plate (Bulk P/N: 211 711 149)
• Stock Shifter Assy., Straight, Type 1, 68-on (Bulk P/N: 113 798 121A) w/12mm Thread & Knob
• Stock Shifter Assy., Angled, Type 1, 56-67 (Bulk P/N: 113 798 121) w/10mm Thread & Knob
• H.D. BUGPACK Reverse Lockout Plate
• Porsche 356 C & 912 86mm JE Forged Piston Set 9.5:1
• BILLET PLUS” Performance Shifter, Type 2, 66-79 RHD
• BILLET PLUS” Performance Shifter, Type 2, 66-79 LHD
• BILLET PLUS” Performance Shifter, Type 2, 60-65 RHD
• BILLET PLUS” Performance Shifter, Type 2, 60-65 LHD
• BILLET PLUS” Performance Shifter, Type 1, RHD
• BILLET PLUS” Performance Shifter, Type 1, LHD
• Gear Shift Boot, Black
• Billet Aluminum Shift Knob, Round
• Bulk Black Knob Only
• Bulk Rubber Boot Only
• Bulk Plastic Boot Only
• Trigger Shifter, Extra Long, Bus, 60-79, 23 1/2" O.A.L.
• Trigger Shifter, Long, All Bug & Ghia, 13 1/2" O.A.L.
• Polished Alum. T-Handle Shifter, RHD, Standard, 12" O.A.L.
• Polished Alum. T-Handle Shifter, Standard, 12" O.A.L.
• Polished Alum. T-Handle Shifter, Short, 10" O.A.L.
• Pinion Nut Socket
• Starter Bushing Puller, 12V
• Oil Piston Puller
• Static Timing Light
• Tie Rod End Puller 18mm to 25mm Rods
• Coil Spring Compressor, Pair
• Strut Nut Socket
• Injection Pump Locking Pin
• Jet Gauge, .45mm - 1.50mm Range
• Jet Reamer Kit
• EMPI Carburetor Universal Pro-Synchronizers
• SU Type Carburetor Synchronizer
• Moly Assembly Lube, 1/4 oz. Tube
• GASGACINCH, 4 oz. Cans, 24 Per Case
• Case Splitter, Kit
• Torque Multiplier, Kit 36MM
• VW/Audi Tension Spanner
• Oil Filler Nut Removal Tool w/ Internal grip
• Oil Filler Nut Removal Tool, 1/2" Drive
• End-Play Measuring Tool
• Valve Lifter Retaining Clips, Pair
• Deck Height Measuring Tool
• Axle Nut Removal Tool, 46mm For Type 2, 63 & Later
• Axle Nut Removal Tool, 36mm
• Axle Nut Socket, 46mm, 3/4" Drive
• Gland/Axle Nut Socket, 36mm, 1/2" Drive
• C.V. Joint 6-Point Hex Socket, 8mm, 3/8" Drive
• C.V. Joint 12-Point Hex Socket, 8mm, 3/8" Drive
• Trans Drain Plug Wrench, 17mm
• Trans Drain Plug Tool, 17mm, 3/8" Drive
• Condenser Installation Tool
• Bench Mount Head Assembly Tool, Boxed
• Push Rod Measuring Tool, Each
• Scissor Jack, Type 2 & Type 1, Each
• Clutch Adjustment Tool, Air-Cooled
• Crank Pulley Aid
• Deluxe Flywheel Seal Installation Tool
• Flywheel Seal Installation Tool
• Ring Compressor, 88-94mm
• Ring Compressor, 83-87mm
• Valve Adjustment Tool, 13mm