AC Industries Short Spline Axle Rear Disc Brake Kit, with e-Brake.

AC Industries‘ set the highest standard of disc brake kit quality with their unique nodular iron caliper brackets. The superior strength nodular iron caliper brackets maintains proper caliper-to-rotor alignment and will not flex, bend or crack during normal service, like the typical stamped metal brackets found in lower quality kits. Nodular iron caliper brackets offer a much higher level of increased safety, durability and longevity!

Kit Includes:

• (2) Rotors with dual patterns 5 x 4-3/4″ & 5 x 4-1/2″ (Chevy & Ford)
• (2) Calipers
• (2) Nodular iron caliper mounting brackets
• (4) Brake pads (Part#D201)
• (2) e-Brake Cables
• (2) Seal Kits
• Mounting Hardware
• Installation Instructions

Note: Will Fit ’67 with Short Spline Axle ONLY!

Note: Requires two 25″ long metal brake lines (Part#: 113611764B)

Stud Installation Note: These drums/rotors are drilled & tapped with a 14mm x 1.5mm threaded holes. So. Cal. Imports offers a wide variate of screw in studs for most all wheel applications. If you chose to use a lug bolt, test fit the wheel to the rotor/drum before installation to confirm that the lug bolt doesn’t protrude past the inside of the rotor/drum and hit other components. Check with the wheel manufacture or your installer to find out what stud is right for you.

Screw in Wheel Studs (Sold separately):

Wheel Stud, 14mm x 1/2″, Part#601102
Wheel Stud, 14mm x 12 mm, Part#601115
Wheel Stud, 14mm x 14mm, 1 1/2″ long, Part#601111
Wheel Stud 14mm x 14mm, 1 3/4″ long, Part#601120
Wheel Stud, 14mm x 14mm, 2 1/2″ long, Part#601121